Hey as you all know parts for our Mx$'s are costly so i figured I would post a list of all the parts I am looking for and the price which i found them at... if you know a better price I would love to see a reply
Ed
The List
US prices
Altezza Tail lights (now available w/ clear turn signal) $195.00
CORK SPORT MS Style Front Nose Price: $299.00
CORK SPORT MS Style Side Skirts Price: $150.00
MOMO Steering Wheel Hub Price: $65.00
MOMO Champion, 350mm steering wheel Price: $193.00
A4 (each) Price: $320.00x2 MS Seats
CORK SPORT Indigo 'Flying M' Shift Knob Blue Price: $36.00
PRM Pro Kit Intake Price: $179.00
E-SPEC Clear Signal Lenses (pair)Price: $49.00
Polished Aluminum Brake/Clutch Reservoir cover 1.885 Blue Price: $15.00
CORK SPORT Front Strut Tower Bar Price: $79.00
MAZDASPEED Rear arm suspension kit Price: $219.00
SRD Control Arm Bushing Inserts -Front Price: $95.00
SRD Polished Rear Tie Bar Price: $114.00
UNORTHODOX RACING Underdrive Crank Pulley (V6) $119.00
2.5L V6 (KL-ZE) w/approx 197 HP $1700
GROUND CONTROL Coilover Kit Price: $399.00
EIBACH Pro Kit Lowering Springs Price: $240.00
canadian
Windshield $429
Trying to source parts
Trying to source parts
Management is not responsible for lost or stolen virginities.
White 94 Mx-3 BP
Black 93 Mx-3 Kl-De
White 94 Mx-3 BP
Black 93 Mx-3 Kl-De
Re: Trying to source parts
U can get a KLZE from Lucky auto in toronto for $1250. where did u find the unorthodox ud pully for $119 us? a polished aluminum brake/clutch resivor? where'd u find that?
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
Re: Trying to source parts
some parts could be found on ebay quote some parts. as for the others just look around for better prices. got my windshield for $120 US latersOriginally posted by Eggo:
U can get a KLZE from Lucky auto in toronto for $1250. where did u find the unorthodox ud pully for $119 us? a polished aluminum brake/clutch resivor? where'd u find that?
Drifter MX-3
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
Re: Trying to source parts
I assume that most of that stuff is off of corksport. If you get your stuff at say www.psituning.ca you'll save tons on shipping and customs as they are located in Quebec. The few bucks you save on the purchase price wont be worth going south in the end. Just my opinion.
<small>[ August 01, 2004, 04:32 PM: Message edited by: mazdubber ]</small>
<small>[ August 01, 2004, 04:32 PM: Message edited by: mazdubber ]</small>
92 GS
'Stock'...
'Stock'...
Re: Trying to source parts
Email sentOriginally posted by Eggo:
U can get a KLZE from Lucky auto in toronto for $1250. where did u find the unorthodox ud pully for $119 us? a polished aluminum brake/clutch resivor? where'd u find that?
quebec you say yeah I had never heard of <a href="http://www.psituning.ca" target="_blank">www.psituning.ca[/URL]</a> tips like those are gonna help lots thanks
<small>[ August 01, 2004, 01:46 AM: Message edited by: Ed ]</small>
Management is not responsible for lost or stolen virginities.
White 94 Mx-3 BP
Black 93 Mx-3 Kl-De
White 94 Mx-3 BP
Black 93 Mx-3 Kl-De
-
- Regular Member
- Posts: 496
- Joined: November 9th, 2003, 2:01 am
- Location: Calgary, Alberta
- Contact:
Re: Trying to source parts
Holy crap dude.
I got my windshield for $215 from Standard Auto Glass in Red Deer, AB.
Had the basic tint up top, and that was installed. $230.05 with taxes.
Also, I picked up a Vibrant front strut tower bar for $41 locally.
<small>[ August 06, 2004, 01:41 PM: Message edited by: Darcy ]</small>
I got my windshield for $215 from Standard Auto Glass in Red Deer, AB.
Had the basic tint up top, and that was installed. $230.05 with taxes.
Also, I picked up a Vibrant front strut tower bar for $41 locally.
<small>[ August 06, 2004, 01:41 PM: Message edited by: Darcy ]</small>
-
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: Trying to source parts
If your getting Ground Control Coilovers, you wont have a use for the eibach springs. The coilovers come with springs. If you want you can request your spring rates.
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies