Need a stock air intake setup
-
- Junior Member
- Posts: 26
- Joined: May 20th, 2011, 9:38 am
- antispam: ~SPAM*SUX~
- Contact:
Need a stock air intake setup
I have a 93 Mazda MX-3 V6 1.8. I have tried to get it smogged several times, but it is noted as a mass polluter. Since then I got a brand new catalytic converter, and that pretty much fixed the problem. but now, I am told that I dont have a "stock" air intake, and its illegal here in california without a CARB sticker.....Does anyone have a stock air intake for this car? Or maybe a CARB sticker I could have? So i could finally get it smogged, and sold? I have 4 vehicles right now, and am moving soon and this was my fun little car to have, but its time to get it sold.. Unless someone on here wants to buy it?
-
- Regular Member
- Posts: 1614
- Joined: November 5th, 2011, 8:32 pm
- antispam: ~SPAM*SUX~
- Location: Calgary, Alberta
Re: Need a stock air intake setup
Do you need the full intake assembly? throttle body to airbox and then the actual air box?
Daninski wrote:This is my MX3. There are many like it, but this one is mine. My MX3 is my best friend. It is my life. I must master it as I master my life. My MX3, without me, is useless. Without my MX3, I am useless. I must fire up my MX3 true. I must drive straighter than any Honda driver who is trying to own me. I must own him before he owns me.
-
- Junior Member
- Posts: 26
- Joined: May 20th, 2011, 9:38 am
- antispam: ~SPAM*SUX~
- Contact:
Re: Need a stock air intake setup
I need everything after the intake manifold except the MAF. I have that
-
- Junior Member
- Posts: 26
- Joined: May 20th, 2011, 9:38 am
- antispam: ~SPAM*SUX~
- Contact:
Re: Need a stock air intake setup
So does anyone have an intake setup that they could part with? i really need to get this car smogged...lol
- Surgeonasst222
- Regular Member
- Posts: 486
- Joined: February 10th, 2013, 10:05 am
- antispam: ~SPAM*SUX~
- Location: Allegan, MI
Re: Need a stock air intake setup
Do you just need the box?
I just bought a cai adaptor to replace the stock box and filter, but I won't be able to install it till this dam snow goes away...
I didn't buy a whole kit thoe, so I am keeping the stock piping of now... I don't know if this helps at all...
I just bought a cai adaptor to replace the stock box and filter, but I won't be able to install it till this dam snow goes away...
I didn't buy a whole kit thoe, so I am keeping the stock piping of now... I don't know if this helps at all...
Mazda3 2012 - my NEW DD
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
-
- Junior Member
- Posts: 26
- Joined: May 20th, 2011, 9:38 am
- antispam: ~SPAM*SUX~
- Contact:
Re: Need a stock air intake setup
well i need the piping too....unless i can install the box with this current piping and have the smog guys say its good?
- Surgeonasst222
- Regular Member
- Posts: 486
- Joined: February 10th, 2013, 10:05 am
- antispam: ~SPAM*SUX~
- Location: Allegan, MI
Re: Need a stock air intake setup
Well if your kit will work on a SOHC 4cly, then I can just trade you
Mazda3 2012 - my NEW DD
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
-
- Junior Member
- Posts: 26
- Joined: May 20th, 2011, 9:38 am
- antispam: ~SPAM*SUX~
- Contact:
Re: Need a stock air intake setup
will what you have work on my v6 1.8 dohc? if so, i think we have a deal
- Surgeonasst222
- Regular Member
- Posts: 486
- Joined: February 10th, 2013, 10:05 am
- antispam: ~SPAM*SUX~
- Location: Allegan, MI
Re: Need a stock air intake setup
Maybe someone can let us know cuz I have no idea lol
Mazda3 2012 - my NEW DD
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
-
- Junior Member
- Posts: 26
- Joined: May 20th, 2011, 9:38 am
- antispam: ~SPAM*SUX~
- Contact:
Re: Need a stock air intake setup
well i posted a new thread asking, hopefully someone will reply to it soon!
- King58
- Regular Member
- Posts: 69
- Joined: September 30th, 2009, 9:42 pm
- antispam: No
- Location: Markham, Ontario
Re: Need a stock air intake setup
Surgeon his setup will work fitment wise but you need to change the maf and the nipple may be a little too short.
Assuming that you are giving usnjenkins a 4 bangr set up, this will not fit his car. The k8 intake hose and the box are different compared to the b6.
Assuming that you are giving usnjenkins a 4 bangr set up, this will not fit his car. The k8 intake hose and the box are different compared to the b6.
______________________________________________________________________________
94' RS Sold
94' GS Sold
96' GS PROJECT XD
-
- Junior Member
- Posts: 26
- Joined: May 20th, 2011, 9:38 am
- antispam: ~SPAM*SUX~
- Contact:
Re: Need a stock air intake setup
king, just wondering, how do I check to see what type of engine I have? I dont think I have ever known....lol i could check tonight after I get off work. and not the size, its a v6 1.8, but the model, like k8 or klze.
- Surgeonasst222
- Regular Member
- Posts: 486
- Joined: February 10th, 2013, 10:05 am
- antispam: ~SPAM*SUX~
- Location: Allegan, MI
Re: Need a stock air intake setup
U could find someone here just starting a project with a v6 and swap with them! If I had a v6 I would do it I have no smog laws in Michigan
Mazda3 2012 - my NEW DD
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
- ryan_Fuerte
- Regular Member
- Posts: 223
- Joined: May 12th, 2006, 1:01 pm
- Location: Ottawa
- Contact:
Re: Need a stock air intake setup
Have you found an air box yet? I should have one in my parts car im parting out.
Mx-3 GSr : Rebuilt klde with 5spd swap, xtd stage 3 clutch, Magnaflow dual exhaust,Accord custom intake, kyb gr2 struts with eibach springs, civic dual halo projectors, black altezzas, white 15'' oz rims, rolling on dunlop street slicks.
http://www.cardomain.com/ride/2400330
http://www.cardomain.com/ride/2400330
Re: Need a stock air intake setup
I have the complete setup pm me if interested.
1 mx6 88 LX auto 2.2l 4cyl
2 mx6 93 LS saved from junkyard SOLD
3 Mx6 96 M edition blow a ze part it
4 Mx6 96 gold LS paint n lights auto SOLD
5 mx6 red fresh paint clean, sold
1 mx3 92rs sohc auto rota c8s h&r
2 mx3 93 gsze bought w/ mods
3 mx3 93 GSze mtx swp act stg3 str8 nek im eibach kl36
4 mx3 GS SOLD-
6 mx3 white gs jdm swap'd SOLD
*5th mx3 blk GS clean title modded DD*
1 PGT 97 blk, garaged clean sold
2 pgt primered 5 spd KL SOLD
2 mx6 93 LS saved from junkyard SOLD
3 Mx6 96 M edition blow a ze part it
4 Mx6 96 gold LS paint n lights auto SOLD
5 mx6 red fresh paint clean, sold
1 mx3 92rs sohc auto rota c8s h&r
2 mx3 93 gsze bought w/ mods
3 mx3 93 GSze mtx swp act stg3 str8 nek im eibach kl36
4 mx3 GS SOLD-
6 mx3 white gs jdm swap'd SOLD
*5th mx3 blk GS clean title modded DD*
1 PGT 97 blk, garaged clean sold
2 pgt primered 5 spd KL SOLD