[FS] Bunch of OEM parts for MX-3
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
[FS] Bunch of OEM parts for MX-3
UPDATE posted prices....they don't include shipping (cept the strut bars).
Cleaning up my basement & found a ton of parts I still have from the time when i owned 2 MX-3's. Here's the list:
-1- Ignition switch 5
-2- Like-new remanufactured K-Series Distributor w/cap & rotor 35
-3- Air Conditioning Harness w/relays 5
-4- VRIS Solenoids, i have 2 of these 15 each
-5- EGR Solenoid w/bracket 5
-6- 2x "O-sh17 handles" from non-power seatbelt models. 1 handle is missing one of its screws 5
-7- Like-new Washer nozzles w/gaskets. I bought these new from Mazda & never used them 5
-8- Coolant Reservoir with cap. I have 2 of these 5
-9- Door Lock relay (no pic) 5
-10- Blinker/Flasher/Hazard relay 5
-11- Clutch Switch (under pedal) 5
-12- Interior Door Handles x2 5
-13- Drivers-side manual seatbelt in black w/bolts 5
-14- OEM Leather shiftboot w/plastic bracket. Fits 90-94 323/Protege also 20
-15- RH Passenger amber turn signal housing 5
-16- RH Passenger taillight housing 15
-17- LH Drivers taillight housing 15
-18- HVAC panel w/cables 10
-19- Front "MAZDA" K-series valve cover w/oil cap 30
-20- 8mm 4x100 wheel spacers x2 10
-21- 1.8L BP Upper timing cover 10
-22- Drivers-side Gold fender w/"GS" sticker in great shape. No dings & glossy paint 25
-23- G25M-R Exedy 225mm Clutch kit with less than 5k miles (from a Festiva Project). Fits G-Series transmission 30
-24- Front & rear strut tower bars 60 shipped
Prices are OBO and don't include shipping.. If anyone needs them let me know via reply/PM/AIM/Email. I am willing to ship internationally if you pay the shipping. The parts are located in Gambrills, MD 21054 if you want to pick up.
Cleaning up my basement & found a ton of parts I still have from the time when i owned 2 MX-3's. Here's the list:
-1- Ignition switch 5
-2- Like-new remanufactured K-Series Distributor w/cap & rotor 35
-3- Air Conditioning Harness w/relays 5
-4- VRIS Solenoids, i have 2 of these 15 each
-5- EGR Solenoid w/bracket 5
-6- 2x "O-sh17 handles" from non-power seatbelt models. 1 handle is missing one of its screws 5
-7- Like-new Washer nozzles w/gaskets. I bought these new from Mazda & never used them 5
-8- Coolant Reservoir with cap. I have 2 of these 5
-9- Door Lock relay (no pic) 5
-10- Blinker/Flasher/Hazard relay 5
-11- Clutch Switch (under pedal) 5
-12- Interior Door Handles x2 5
-13- Drivers-side manual seatbelt in black w/bolts 5
-14- OEM Leather shiftboot w/plastic bracket. Fits 90-94 323/Protege also 20
-15- RH Passenger amber turn signal housing 5
-16- RH Passenger taillight housing 15
-17- LH Drivers taillight housing 15
-18- HVAC panel w/cables 10
-19- Front "MAZDA" K-series valve cover w/oil cap 30
-20- 8mm 4x100 wheel spacers x2 10
-21- 1.8L BP Upper timing cover 10
-22- Drivers-side Gold fender w/"GS" sticker in great shape. No dings & glossy paint 25
-23- G25M-R Exedy 225mm Clutch kit with less than 5k miles (from a Festiva Project). Fits G-Series transmission 30
-24- Front & rear strut tower bars 60 shipped
Prices are OBO and don't include shipping.. If anyone needs them let me know via reply/PM/AIM/Email. I am willing to ship internationally if you pay the shipping. The parts are located in Gambrills, MD 21054 if you want to pick up.
Last edited by Gro Harlem on January 3rd, 2013, 10:22 am, edited 1 time in total.
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: [FS] Bunch of OEM parts for MX-3
Good to see you posting Gro! You are in Germany now?!
You have to post prices... you can still list everything as or best offer too but prices have to be listed.
You have to post prices... you can still list everything as or best offer too but prices have to be listed.
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [FS] Bunch of OEM parts for MX-3
Welcome back!
If you're stateside, and not in Germany, I'm interested in the clutch setup.
Do you know how much torque the clutch is rated for?
Is it the complete kit?
Thank you
If you're stateside, and not in Germany, I'm interested in the clutch setup.
Do you know how much torque the clutch is rated for?
Is it the complete kit?
Thank you
Daily:
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
Re: [FS] Bunch of OEM parts for MX-3
Gro Harlem. I thought I would never see that name again. Welcome back, even if temporary. I'm interested in the strut bars...but mainly the rear. I purchased a "Fast" front strut bar from a member here not long ago.
1993 Mazda Mx-3 GS-Sold
1992 GS "The Bucket" Gone.
1993 GS 2.5 KLDE. Current daily.
92 GS 5spd for sale! Sold it....after I got a hatch cover in great condition
92 GS Auction Car, most expensive non-running mx-3 I have ever bought... Parted out and Crushed.
MY WORKLOG, check it out viewtopic.php?f=46&t=79959
1992 GS "The Bucket" Gone.
1993 GS 2.5 KLDE. Current daily.
92 GS 5spd for sale! Sold it....after I got a hatch cover in great condition
92 GS Auction Car, most expensive non-running mx-3 I have ever bought... Parted out and Crushed.
MY WORKLOG, check it out viewtopic.php?f=46&t=79959
Re: [FS] Bunch of OEM parts for MX-3
Didn't see it but how about a trans neutral switch? Anyway hope to see you here from time to time. Cheers.
2004 Subaru WRX Silver, stage 2, minty interior.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: [FS] Bunch of OEM parts for MX-3
......honestly just would rather see this stuff be used than me trash it. I don't want to scare people off by posting a price tha they might perceive as too high.Mooneggs wrote:Good to see you posting Gro! You are in Germany now?!
You have to post prices... you can still list everything as or best offer too but prices have to be listed.
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: [FS] Bunch of OEM parts for MX-3
It is just a OEM replacement. It has everything but the throwout bearing. It comes with a new pilot bearing, alignment tool & the clutch disc & pressure plate. I can't find torque holding specs but I would guess it is in the vicinity of 225-250 ft-lbs is what the factory clutch is capable of holding.MrMazda92 wrote:Welcome back!
If you're stateside, and not in Germany, I'm interested in the clutch setup.
Do you know how much torque the clutch is rated for?
Is it the complete kit?
Thank you
Would really prefer not to split them up, mostly cuz shipping them separately is a bigger pain. I posted a separate thread for it & i wanted 60 shipped for both together.atx_mx3 wrote:Gro Harlem. I thought I would never see that name again. Welcome back, even if temporary. I'm interested in the strut bars...but mainly the rear. I purchased a "Fast" front strut bar from a member here not long ago.
Used to have one but I threw it away actually . I had the one on my MX-3's wires shear off so I had a couple spares at one point.Daninski wrote:Didn't see it but how about a trans neutral switch? Anyway hope to see you here from time to time. Cheers.
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [FS] Bunch of OEM parts for MX-3
Hmm, was the Exedy a K8 or KL clutch?
If it was marketed for a KL, I'll buy it off of you
If it was marketed for a KL, I'll buy it off of you
Daily:
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
Re: [FS] Bunch of OEM parts for MX-3
pm'd you but not sure if you got my message. Il only need the seat belt and i just sent funds to your paypal . thanks again!
purple monster - 94 Mx3
Work in progress - 92 mx3
Work in progress - 92 mx3
- OROutdoors
- Supporting Member
- Posts: 339
- Joined: December 4th, 2006, 4:38 pm
- Location: Tigard, OR
Re: [FS] Bunch of OEM parts for MX-3
And, if It is for the K8, then I am interested in it.MrMazda92 wrote:Hmm, was the Exedy a K8 or KL clutch?
If it was marketed for a KL, I'll buy it off of you
Also interested in the washer nozzle.
Oregon Outdoors
92 mx-3 GS lowered, CF hood
2013 Mazdaspeed3
92 mx-3 GS lowered, CF hood
2013 Mazdaspeed3