[FS]just about everything - 1993 mx3 rs
-
- Regular Member
- Posts: 1614
- Joined: November 5th, 2011, 8:32 pm
- antispam: ~SPAM*SUX~
- Location: Calgary, Alberta
Re: [FS]just about everything - 1993 mx3 rs
I've found the build quality of ebay wheels to be atrociously bad, I bent mine in half making a left turn a day after I installed it, it doesn't surprise me that you broke it easily.
Daninski wrote:This is my MX3. There are many like it, but this one is mine. My MX3 is my best friend. It is my life. I must master it as I master my life. My MX3, without me, is useless. Without my MX3, I am useless. I must fire up my MX3 true. I must drive straighter than any Honda driver who is trying to own me. I must own him before he owns me.
- kudkudniyog
- Regular Member
- Posts: 226
- Joined: August 5th, 2005, 4:16 pm
- Location: Palatka, FL
Re: [FS]just about everything - 1993 mx3 rs
I would like the left , center and right green air vents. (no cracks or broken plates in them.includes a/c switch in the center):15$ for all 3
PM'd
PM'd
- kudkudniyog
- Regular Member
- Posts: 226
- Joined: August 5th, 2005, 4:16 pm
- Location: Palatka, FL
Re: [FS]just about everything - 1993 mx3 rs
I think ur inbox is full.
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: [FS]just about everything - 1993 mx3 rs
damn your selling EVERTHING?!?!?! no plans of getting another MX???? maybe a GS this time and toss a ZE into it?????
- racycle
- Regular Member
- Posts: 283
- Joined: September 7th, 2010, 3:01 pm
- antispam: ~SPAM*SUX~
- Location: Boykins Va
Re: [FS]just about everything - 1993 mx3 rs
kakarot135 wrote:How much for shipping for the cai for the sohc, as long as it is decent, I'll take it, ship to 45238
the motor is gone , whats left on the list is all there is.
My next project will either be a 240sx or a miatakulluminati777 wrote:damn your selling EVERTHING?!?!?! no plans of getting another MX???? maybe a GS this time and toss a ZE into it?????
Pm'ed youkudkudniyog wrote:I would like the left , center and right green air vents. (no cracks or broken plates in them.includes a/c switch in the center):15$ for all 3 PM'd
$2,000 for the lunch bag!!!!! also its a water bottle haha. You stuff Is in the hands of usps now. If they give me a tracking # I'll pm you it.stepchyld wrote: How much for the lunch bag?
PM sent
racycle's Worklog!
viewtopic.php?f=46&t=76991 -RIP
Current Toy
http://mx-3.com/phpBB3/viewtopic.php?f=7&t=80470
Please don't tap on the hood. It disturbs the gerbils.
- racycle
- Regular Member
- Posts: 283
- Joined: September 7th, 2010, 3:01 pm
- antispam: ~SPAM*SUX~
- Location: Boykins Va
Re: [FS]just about everything - 1993 mx3 rs
stepchyld's and diezzel's stuff has been shipped. Still waiting on payments for the other pending parts.
racycle's Worklog!
viewtopic.php?f=46&t=76991 -RIP
Current Toy
http://mx-3.com/phpBB3/viewtopic.php?f=7&t=80470
Please don't tap on the hood. It disturbs the gerbils.
- kudkudniyog
- Regular Member
- Posts: 226
- Joined: August 5th, 2005, 4:16 pm
- Location: Palatka, FL
Re: [FS]just about everything - 1993 mx3 rs
PM'd. I think ur inbox is full.
Re: [FS]just about everything - 1993 mx3 rs
$2,000, eh? well, if I find an extra 2g's just laying not doing anything, I'll PM ya!
Oh, wait, what's this?? 2c's still short a bit, but it's a start, lol
Great, looking forward to it. I'm still interested in the Altezza's if fowljesse doesn't pay up...
Oh, wait, what's this?? 2c's still short a bit, but it's a start, lol
Great, looking forward to it. I'm still interested in the Altezza's if fowljesse doesn't pay up...
93 GS, ATX to MTX swap, chrome 16x7, upper strut bars, SRD LCA bushings.
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
- racycle
- Regular Member
- Posts: 283
- Joined: September 7th, 2010, 3:01 pm
- antispam: ~SPAM*SUX~
- Location: Boykins Va
Re: [FS]just about everything - 1993 mx3 rs
I would have to double check my inbox but I'm not sure why has second dibs on the lights. Still waiting on paypal for them though.
racycle's Worklog!
viewtopic.php?f=46&t=76991 -RIP
Current Toy
http://mx-3.com/phpBB3/viewtopic.php?f=7&t=80470
Please don't tap on the hood. It disturbs the gerbils.
Re: [FS]just about everything - 1993 mx3 rs
fowljesse said he'd take them, but if that doesn't happen, I have second dibs, unless someone beat me to it but didn't post...
93 GS, ATX to MTX swap, chrome 16x7, upper strut bars, SRD LCA bushings.
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [FS]just about everything - 1993 mx3 rs
Racycle, you should sell the tails to Stepchyld, as I'm having a hard time with finances.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Re: [FS]just about everything - 1993 mx3 rs
Yea!! My GS will have new butt-lights! HAHA!
Thank you, fowljesse, sorry to hear about problems with finances, that always sucks.
Thank you, fowljesse, sorry to hear about problems with finances, that always sucks.
93 GS, ATX to MTX swap, chrome 16x7, upper strut bars, SRD LCA bushings.
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
Re: [FS]just about everything - 1993 mx3 rs
My parts have arrived, very happy with them!
racycle, you rock!
Looking forward to Altezzas now...
racycle, you rock!
Looking forward to Altezzas now...
93 GS, ATX to MTX swap, chrome 16x7, upper strut bars, SRD LCA bushings.
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
- racycle
- Regular Member
- Posts: 283
- Joined: September 7th, 2010, 3:01 pm
- antispam: ~SPAM*SUX~
- Location: Boykins Va
Re: [FS]just about everything - 1993 mx3 rs
To everyone that pm'ed me sorry i haven't gotten back to you or taken picture. My parents house's chimney actually caught fire once the internal pipework broke and collapsed. I will have all the pictures ready tomorrow. I will pm shipping prices hopefully tomorrow night for everyone still interested.
racycle's Worklog!
viewtopic.php?f=46&t=76991 -RIP
Current Toy
http://mx-3.com/phpBB3/viewtopic.php?f=7&t=80470
Please don't tap on the hood. It disturbs the gerbils.
- racycle
- Regular Member
- Posts: 283
- Joined: September 7th, 2010, 3:01 pm
- antispam: ~SPAM*SUX~
- Location: Boykins Va
Re: [FS]just about everything - 1993 mx3 rs
Sent these in pm's so I figure I should up here to.
Sorry I took so long. I am not 100% sure what you are looking for so I took pictures of everything.
Leather bottom , the top is leather , the middle is a cover i sued over the old fabric which I can remove If you want. Under the green is stained blue fabric from the jungle blue theme some mx-3s came in.
I took pictures of the damage to the top of the black top. I didn't take extras of the bottom becuse there are no defects in it.
plastic around the button is cracked and half missing. the white hoops that snap together on the top are both gone.
one long tear and a small one along the top twards the middle
the other side. the plastic completely cracked and fell off. I think there still is the bottom of the plastic around the button inside the seat.
next to that button missing the plastic ring is a 3rd tear
---------
now for the tan leather set.
The bottom has some mold spots and whatnot from storage. the top is the same way. just not as bad. Other than that the top is flawless , no cracks in the plastic , no tares , and no stains. the bottom has a orange color fabric for the middles of the bottom that have stains.
The bottom is the cover that goes over top of the foam. It is held onto the foam by hog rings that wrap around a metal wire inside the foam.
Both sides of the bottom below. so you can see the stains and all.
Here is the top
Sorry I took so long. I am not 100% sure what you are looking for so I took pictures of everything.
Leather bottom , the top is leather , the middle is a cover i sued over the old fabric which I can remove If you want. Under the green is stained blue fabric from the jungle blue theme some mx-3s came in.
I took pictures of the damage to the top of the black top. I didn't take extras of the bottom becuse there are no defects in it.
plastic around the button is cracked and half missing. the white hoops that snap together on the top are both gone.
one long tear and a small one along the top twards the middle
the other side. the plastic completely cracked and fell off. I think there still is the bottom of the plastic around the button inside the seat.
next to that button missing the plastic ring is a 3rd tear
---------
now for the tan leather set.
The bottom has some mold spots and whatnot from storage. the top is the same way. just not as bad. Other than that the top is flawless , no cracks in the plastic , no tares , and no stains. the bottom has a orange color fabric for the middles of the bottom that have stains.
The bottom is the cover that goes over top of the foam. It is held onto the foam by hog rings that wrap around a metal wire inside the foam.
Both sides of the bottom below. so you can see the stains and all.
Here is the top
racycle's Worklog!
viewtopic.php?f=46&t=76991 -RIP
Current Toy
http://mx-3.com/phpBB3/viewtopic.php?f=7&t=80470
Please don't tap on the hood. It disturbs the gerbils.