Arthur's 1993 mx-3 rs
- racycle
- Regular Member
- Posts: 283
- Joined: September 7th, 2010, 3:01 pm
- antispam: ~SPAM*SUX~
- Location: Boykins Va
Re: Arthur's 1993 mx-3 :]
Been awhile and never got around to posting my last update so here we go.
Got my rubber trim for my doors finally replace. good pictures on the update are on my 'dead' phone.
also found a mint shift boot , no holes,stains or rips , and found a mint ash tray. Nothing on it is broken , and paint is not faded but I do question it a little because it didn't have the "push" word painted onto it.
Got my final kicker panel , the one around the fuse box.
and finally! how she currently sits.
Got my rubber trim for my doors finally replace. good pictures on the update are on my 'dead' phone.
also found a mint shift boot , no holes,stains or rips , and found a mint ash tray. Nothing on it is broken , and paint is not faded but I do question it a little because it didn't have the "push" word painted onto it.
Got my final kicker panel , the one around the fuse box.
and finally! how she currently sits.
racycle's Worklog!
viewtopic.php?f=46&t=76991 -RIP
Current Toy
http://mx-3.com/phpBB3/viewtopic.php?f=7&t=80470
Please don't tap on the hood. It disturbs the gerbils.
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: Arthur's 1993 mx-3 :]
Score on the shift boot, and not bad on the ashtray either!
I snag the unbroken tabs for ashtrays in junkyards, so I have a few extras I need to list for sale. I keep forgetting to add to my FS thread list...
Are you running an iPod/MP3 cord from your Cig lighter location? Good idea, honestly! I hadn't thought of that, I have been trying to find an alternative to my current setup for a while. I may go that route!
I snag the unbroken tabs for ashtrays in junkyards, so I have a few extras I need to list for sale. I keep forgetting to add to my FS thread list...
Are you running an iPod/MP3 cord from your Cig lighter location? Good idea, honestly! I hadn't thought of that, I have been trying to find an alternative to my current setup for a while. I may go that route!
Daily:
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
- racycle
- Regular Member
- Posts: 283
- Joined: September 7th, 2010, 3:01 pm
- antispam: ~SPAM*SUX~
- Location: Boykins Va
Re: Arthur's 1993 mx-3 :]
thanks and yea i am. Mainly because last time i hooked up the lighter it wouldn't work. So I just left it out . The wire runs into the hole though , not out of it. Down under the center and comes out beside the passenger seat so I can set my laptop down.
Also I snag anything \Mazda related that can fit in my pockets
Also I snag anything \Mazda related that can fit in my pockets
racycle's Worklog!
viewtopic.php?f=46&t=76991 -RIP
Current Toy
http://mx-3.com/phpBB3/viewtopic.php?f=7&t=80470
Please don't tap on the hood. It disturbs the gerbils.
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: Arthur's 1993 mx-3 :]
Ah, well good idea either way! Mine doesn't work, and I'm too impatient to fix it honestly. I hate everything electrical, if it's not necessary it's gone!
I need to find a new laptop... hmm.
I need to find a new laptop... hmm.
Daily:
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
- racycle
- Regular Member
- Posts: 283
- Joined: September 7th, 2010, 3:01 pm
- antispam: ~SPAM*SUX~
- Location: Boykins Va
Re: Arthur's 1993 mx-3 :]
SSoooo. everything is for sale once i figure out where in the hell my car got towed to.
racycle's Worklog!
viewtopic.php?f=46&t=76991 -RIP
Current Toy
http://mx-3.com/phpBB3/viewtopic.php?f=7&t=80470
Please don't tap on the hood. It disturbs the gerbils.
-
- Regular Member
- Posts: 1614
- Joined: November 5th, 2011, 8:32 pm
- antispam: ~SPAM*SUX~
- Location: Calgary, Alberta
Re: Arthur's 1993 mx-3 :]
Oh no! What happened?
Daninski wrote:This is my MX3. There are many like it, but this one is mine. My MX3 is my best friend. It is my life. I must master it as I master my life. My MX3, without me, is useless. Without my MX3, I am useless. I must fire up my MX3 true. I must drive straighter than any Honda driver who is trying to own me. I must own him before he owns me.
- racycle
- Regular Member
- Posts: 283
- Joined: September 7th, 2010, 3:01 pm
- antispam: ~SPAM*SUX~
- Location: Boykins Va
Re: Arthur's 1993 mx-3 :]
Was on a wet road, hit the brakes and all 4 tires lost traction as I slid around 20metters into the back of a charter service truck at a stoplight.
racycle's Worklog!
viewtopic.php?f=46&t=76991 -RIP
Current Toy
http://mx-3.com/phpBB3/viewtopic.php?f=7&t=80470
Please don't tap on the hood. It disturbs the gerbils.
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: Arthur's 1993 mx-3 :]
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
- Evo_Spec
- Senior Member
- Posts: 2504
- Joined: December 30th, 2008, 3:41 am
- Location: Calgary, Alberta, Canada
Re: Arthur's 1993 mx-3 :]
that sucks man, glad your ok.
i'd like the CS front strut bar =D
i'd like the CS front strut bar =D
- racycle
- Regular Member
- Posts: 283
- Joined: September 7th, 2010, 3:01 pm
- antispam: ~SPAM*SUX~
- Location: Boykins Va
Re: Arthur's 1993 mx-3 :]
Will be going to the car tomorrow. Let me know if there is anything i need to grab.
racycle's Worklog!
viewtopic.php?f=46&t=76991 -RIP
Current Toy
http://mx-3.com/phpBB3/viewtopic.php?f=7&t=80470
Please don't tap on the hood. It disturbs the gerbils.
- 93DrunkMx3r
- Regular Member
- Posts: 88
- Joined: July 23rd, 2012, 6:52 pm
- antispam: ~SPAM*SUX~
- Location: Newport News, Va
Re: Arthur's 1993 mx-3 :]
let me know what is salvagable...i need a lot for mine and your preeeetty close...sorry for your loss bro you gonna get another one?
- racycle
- Regular Member
- Posts: 283
- Joined: September 7th, 2010, 3:01 pm
- antispam: ~SPAM*SUX~
- Location: Boykins Va
Re: Arthur's 1993 mx-3 :]
If I could somehow find another CLOSE and CHEAP yea. Sadly I owe money now sooooo probably not.
It has the small 88hp sohc in it.
It is still at the lot but I don't know for how long :/ If you wanted I can call tomorrow to see If I can still pull stuff off of it. If I can and you could meet me , we could go to it and pull what ever off(they told me they need the wheels to move it around.)
what you see in the pic is the only real damage. from the passenger door back is good, everything in the bay looks to be in tact and the driver side is mint the car had virtually no rust. I gutted most of the interior as you can see in my [FS] thread.
If we can, you can have what ever you take free , a few bucks wouldn't hurt <3 but if you don't get it, it's gonna sit there until the tow company dose something with it.
the tow storage fee is 35$ a day , and today makes day#3, if you could pay that fee and have a way to tow it, take the hole thing. title WAS clean till now.
It has the small 88hp sohc in it.
It is still at the lot but I don't know for how long :/ If you wanted I can call tomorrow to see If I can still pull stuff off of it. If I can and you could meet me , we could go to it and pull what ever off(they told me they need the wheels to move it around.)
what you see in the pic is the only real damage. from the passenger door back is good, everything in the bay looks to be in tact and the driver side is mint the car had virtually no rust. I gutted most of the interior as you can see in my [FS] thread.
If we can, you can have what ever you take free , a few bucks wouldn't hurt <3 but if you don't get it, it's gonna sit there until the tow company dose something with it.
the tow storage fee is 35$ a day , and today makes day#3, if you could pay that fee and have a way to tow it, take the hole thing. title WAS clean till now.
racycle's Worklog!
viewtopic.php?f=46&t=76991 -RIP
Current Toy
http://mx-3.com/phpBB3/viewtopic.php?f=7&t=80470
Please don't tap on the hood. It disturbs the gerbils.
- AaronTietje
- Regular Member
- Posts: 1196
- Joined: August 21st, 2009, 5:24 pm
- antispam: No
- Location: Prattsburgh NY
Re: Arthur's 1993 mx-3 :]
Sorry man, I have enjoyed this build.
We all want to be fast and look cool. Cool changes but fast never does.
- 93DrunkMx3r
- Regular Member
- Posts: 88
- Joined: July 23rd, 2012, 6:52 pm
- antispam: ~SPAM*SUX~
- Location: Newport News, Va
Re: Arthur's 1993 mx-3 :]
couple questions hows the shift boot? mine is tearing at the stitching.....also, do you have the door key and do the door locks at the handle match? and lastly are those petal clips or ms petals? i would def pay you for all of these items and meet you if at all possible