Mi|<e - 94 GS BPT dyno tuned

IMACHU2 · Post by **IMACHU2** » April 1st, 2012, 11:31 pm

You must have the most understanding wife/girl friend in the world if you really rebuilt your engine in the "kitchen"

Seriously though, nice work.

TotallyNotDave · Post by **TotallyNotDave** » April 2nd, 2012, 1:48 am

This is a amazing build Mike.

It also looks like you had some awesome body work done. Like a 3 stage cut polish or something.

That valve cover looks amazing, whoever cleaned that is surely a god.

Keep up the good work!

Mi|<E · Post by **Mi|<E** » April 17th, 2012, 9:55 am

So the turbo has been rebuilt, bit expensive but they did a really nice job. New
turbine wheel which is a little bigger than the previous one:

Its all balanced and has no shaft play at all. Engine is assembled but now I have
to swap the tranny as the electric speedo gear ring from the mx-3 GS tranny has
fallen in and caused the gears to bind. Oh well new bearing / synchro tranny goes in.

Tavman_1213 · Post by **Tavman_1213** » April 17th, 2012, 10:58 am

Where did you get your turbo rebuilt? I talked to Alamo and they are about $450 for mine!

Mi|<E · Post by **Mi|<E** » April 17th, 2012, 12:04 pm

Alamo is the only place in the city that does turbochargers. They mostly
do huge trucks. 450 is pretty standard for a rebuild, they do the whole
unit though so its quite worth it if you have any doubt about the health
of your turbo. Warranty too.

WhiteFinish · Post by **WhiteFinish** » April 17th, 2012, 4:08 pm

Looking badass that turbo

Mi|<E · Post by **Mi|<E** » April 23rd, 2012, 7:05 pm

RS_OBD'oh_2 · Post by **RS_OBD'oh_2** » April 23rd, 2012, 7:47 pm

Step one: Pull tranny

Step two: Insert Mike

This is the last road block. That's it... I've had enough. She needs to be broken in.

kyser182 · Post by **kyser182** » April 24th, 2012, 2:17 am

You are awesome!
Wish I would of gotten in to cars at a younger age.
You have a ton of ingenuity and it is great to see!

Evo_Spec · Post by **Evo_Spec** » April 24th, 2012, 2:40 am

hey you went out and got a engine support! it really helped us to get under the car, looks like it came in handy for you too!

so did the speedo gear do any damage? or are you gonna be able to put your tranny back in without rebuilding it again like you were talking about.

Awesome update, gave me quite a laugh. i would definitely like a ride in your car when you get it all done.....again lol =)

RobMinhas · Post by **RobMinhas** » April 25th, 2012, 1:52 am

The last update was the most well articulated, comical and awesome post on this site. One of the best uses of rage faces I've ever seen.

Evo_Spec · Post by **Evo_Spec** » May 28th, 2012, 4:25 am

so what's going on with this? i assume it's back together and running?

Mi|<E · Post by **Mi|<E** » May 28th, 2012, 10:54 am

Yeah low boost is tuned, waiting on tuner to return from the states to finish high boost.

Havent seen dyno numbers but im told its way better than before. Butt dyno is meh cause
it stops after 8 lbs

Mi|<E · Post by **Mi|<E** » June 15th, 2012, 7:51 pm

Traction?

Tavman_1213 · Post by **Tavman_1213** » June 15th, 2012, 9:41 pm

So clean mike!! I hope to be able to drive with you by August 1st!!

MX-3.com

Mi|<e - 94 GS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned

Re: Mi|<e - 94 RS BPT dyno tuned