-NOS kit - with new low price
-460cc injectors x 2
-BP injectors x 2
-MX6 320cc injectors
-1.6L injectors
-BP lifters
-Brand new Hood pins - SOLD
-Ford Probe BOV
-VF10 Elbow x 2
-4 wire TPS
-TB with 3 wire TPS
-VF10 Hotside
-VF10 turbo core
-B6DE distributor
-BP FPR
-MX3 Fuel Pump
-VAF intake adapters x 2 - SOLD
-KnN filter
-Lambada boy SOLD
-Coilpacks
-DE intake mani
*added*
-Projector housings
-white GS rear spoiler looking for 80 bucks SHIPPED in the lower 48, I will have it off of the cal later this week.

-I have a Direct port NOS wet nitrous kit. This was for the RS it is 4x80 shot nozzles. I am looking for 175.00 SHIPPED in the lower 48. It was over 500 new, it has been installed in a car but never used, it will need a on off toggle for inside the car and lines to the intake as I made custom ones for my intake.

Injectors you want them I got them... I have used all of these in my car at one point or another. What I have is 2 sets of 460cc RX7 injectors 85 a set shipped anywhere in the US, 2 sets of BP injectors 1 set missing the caps 60 for the good ones 40 for the ones missing the caps shipped, one set of 1.6L injectors 45 bucks shipped, and 1 set of mx6 injectors I believe they are 320cc if I recall 85 shipped for them.

A set and a half of BP lifters 25 bucks shipped.

Misc Turbo Parts.. Ford Probe BOV 2" 25.00 plus shipping, 2 VF10 elbows (i believe) 10 bucks for the one with the notch cut out and 15 for the other, 4 wire TPS 20 bucks shipped, TB with 3 wire TPS 25 plus shipping, VF10 Hotside in great shape 35 bucks plus shipping, VF10 core in great shape NO SLOP at all in this one 120. shipped.

B6DE distributor I bought this new in 05' and used it for like 6 months only until i went to external coil. 90 shipped

BP FPR - 15 shipped

Stock MX fuel pump 15 bucks plus shipping

3" oiled KnN style filter Brand new in the box 20 plus shipping

Coil packs from a SDS stand alone system. I know they were installed but never used from what I was told. they sat mounted in an engine bay for several years. I was going to use them with my SDS system but I would have to send it back in for reprogramming. They can be wired to work with any set up. 75.00 OBO plus shipping

MX-6 KLDE intake Mani 35.00 OBO plus shipping

These are projector housings I bought a couple of years ago spent 60 bucks on them looking for 30



Again all prices are OBO
Thanks for looking