shifter fell down and cant get back up

[rodnet]

ok so im geting on the highway i reach down to shift to 5th gear and my shifter has dropped about six inches needless to say i was alarmed so i pulled the top off to take a look and it seems that the linkage has separated. i was wondering if anyone knows if there is a bolt that holds this part on, which i could not see when i jacked it up. or if its a broken weld which did not seem the case either heres some images to illustrate what im talking about
http://img860.imageshack.us/i/dscf0030s.jpg/
here it is held properly in place
http://img219.imageshack.us/i/dscf0027ar.jpg/

it still shifts fine but the only thing holding it up is the exhaust pipe
http://www.mx-3.com/manuals/showimg.php ... J2-054.gif here is the manual entry for the linking installation it seems to reference a bolt on the upper right.
any help or pointers would be much appreciated..

[Nd4SpdSe]

viewtopic.php?f=39&t=44745

[muttpower]

You should get your shifter one of those Life Alert necklaces!!! Get it????
I've fallen, and I can't get up!!!!! I know, I need help...

[rodnet]

thanks for the link Nd4SpdSe if anyone is trying to follow along the link was missing the www http://www.mx-3.com/phpBB3/viewtopic.php?f=39&t=44745 now to decide if i should hunt down this bracket or do the quick and dirty shove a bolt in there

[Dragon1212]

You should get your shifter one of those Life Alert necklaces!!! Get it????
I've fallen, and I can't get up!!!!! I know, I need help...

The Fall sensr is bulls--- man, im sorry if you can't reach the f---ing button you are so far into the death line you need to get that is time, see now you get knocked out you are the only exception

[Daninski]

You should get your shifter one of those Life Alert necklaces!!! Get it????
I've fallen, and I can't get up!!!!! I know, I need help...

The Fall sensr is bulls--- man, im sorry if you can't reach the f---ing button you are so far into the death line you need to get that is time, see now you get knocked out you are the only exception

WTF?

Short cut to Chris Rummel's Email for info on the bracket: Rumnhammer@aol.com

[wytbishop]

It's pretty easy to replace. If you have a 4 cyl it interchanges to the 90-94 protege 5 speed as well. Pretty easy to find. The bracket on the V6 shift bar is slightly different so you can't interchange between GS and RS.