I'm transplanting Cruise Control from a CA MX3 into a Eunos Presso here in the UK. (first of it's kind that I know off)
However, I've hit a slight snag, If you have Cruise Control on your baby, Can you take images of the engine bay and follow the electrical cables back until you reach something and take an image of that (what ever it is) I'll build up how it fits from the images as well as what I've got here + the manual pages.
Many thanks.
Request from people with Cruise Control
-
- Regular Member
- Posts: 95
- Joined: November 1st, 2009, 1:18 pm
- antispam: No
Request from people with Cruise Control
Owner of the UK MX3 site.
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Request from people with Cruise Control
You probably won't get this project done.
Its very complicated. IIRC, Umcamara was an car electronics installer by trade, and he abandoned it due to difficulty.
The CC module (the box you speak of) requires signals from the brake switch, clutch switch, neutral switch, VSS, it needs power and ground to both the CCM and the actuator. You also need the column wiring and switches. I believe there's also an inertia sensor, but thats likely in the CCM itself.
Its very complicated. IIRC, Umcamara was an car electronics installer by trade, and he abandoned it due to difficulty.
The CC module (the box you speak of) requires signals from the brake switch, clutch switch, neutral switch, VSS, it needs power and ground to both the CCM and the actuator. You also need the column wiring and switches. I believe there's also an inertia sensor, but thats likely in the CCM itself.
Last edited by Ryan on January 11th, 2011, 11:07 am, edited 1 time in total.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
-
- Regular Member
- Posts: 95
- Joined: November 1st, 2009, 1:18 pm
- antispam: No
Re: Request from people with Cruise Control
I picked up some of the parts off Umcamera ![Smile :)](./images/smilies/icon_smile.gif)
I prob won't get it ever done, but I'd hate myself if I didn't try.
![Smile :)](./images/smilies/icon_smile.gif)
I prob won't get it ever done, but I'd hate myself if I didn't try.
Owner of the UK MX3 site.
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: Request from people with Cruise Control
PM Steve_SK - I believe he was successful installing cruise control in his mx-3
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
![Image](http://i806.photobucket.com/albums/yy344/Mooneggz/laguna_seca_signature.jpg)
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
![Image](http://i806.photobucket.com/albums/yy344/Mooneggz/laguna_seca_signature.jpg)