Lot of parts to sell........QUICK..

Do you have an MX-3 related item for sale? Post a quick note here.
Machelski65
Regular Member
Posts: 269
Joined: July 20th, 2002, 2:01 am
Location: Hemlock,Michigan -USA-

Re: Lot of parts to sell........QUICK..

Post by Machelski65 »

Alright man good luck. Still got lots of good stuff... Make some offer and we'll move these parts... Thanks A.J.
Machelski65
Regular Member
Posts: 269
Joined: July 20th, 2002, 2:01 am
Location: Hemlock,Michigan -USA-

Re: Lot of parts to sell........QUICK..

Post by Machelski65 »

Like to add I have all 3 locks(doors/hatch), and ignition with factory key... And complete column, steering gear yea still bunch of stuff. Reasonable offer will likely get the parts. Let me know A.J.
KingJoe
Junior Member
Posts: 4
Joined: January 27th, 2004, 2:01 am
Location: NEPA
Contact:

Re: Lot of parts to sell........QUICK..

Post by KingJoe »

I need the linkage piece that connects the shifter to the transmission..... Along with the u-joint looking thing it connects to and all the bushings..... Please email me with any info.....
It looks like a 2 foot pipe.....
Thank You,
King Joe :pimp:

<img src="http://www.allstickers.com/mazda.jpg" alt=" - " />

<small>[ February 19, 2004, 08:35 PM: Message edited by: KingJoe ]</small>
Machelski65
Regular Member
Posts: 269
Joined: July 20th, 2002, 2:01 am
Location: Hemlock,Michigan -USA-

Re: Lot of parts to sell........QUICK..

Post by Machelski65 »

Hey King, its under her still. Make me an offer. Peace A.J.
BoostedZE
Junior Member
Posts: 10
Joined: February 19th, 2004, 2:01 am
Location: NY

Re: Lot of parts to sell........QUICK..

Post by BoostedZE »

u got the tranny? ill give u 20 plus shipping for the locks...
Mx-3 GS KLZE swapped, 10lb boost.. stock exterior sleeper
Machelski65
Regular Member
Posts: 269
Joined: July 20th, 2002, 2:01 am
Location: Hemlock,Michigan -USA-

Re: Lot of parts to sell........QUICK..

Post by Machelski65 »

boosted I got the tranny. As for locks you need ignition too. Make it $40 plus shipping.. Peace
Machelski65
Regular Member
Posts: 269
Joined: July 20th, 2002, 2:01 am
Location: Hemlock,Michigan -USA-

Re: Lot of parts to sell........QUICK..

Post by Machelski65 »

Toppin up....
Machelski65
Regular Member
Posts: 269
Joined: July 20th, 2002, 2:01 am
Location: Hemlock,Michigan -USA-

Re: Lot of parts to sell........QUICK..

Post by Machelski65 »

bump..
DJsMX-3
Regular Member
Posts: 507
Joined: January 11th, 2004, 2:01 am
Location: Denmark

Re: Lot of parts to sell........QUICK..

Post by DJsMX-3 »

Hey do you still have the thingy used to adjust the headlightangle from inside the car? The one fitted right next to the dimmer/sidemirror-adjuster...

Could use a spare one :D
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
Machelski65
Regular Member
Posts: 269
Joined: July 20th, 2002, 2:01 am
Location: Hemlock,Michigan -USA-

Re: Lot of parts to sell........QUICK..

Post by Machelski65 »

Dennis I have no clue what part you are askin for. None of the MX's I have owned/seen have a switch to adjust headlight angle from inside the car. Did you make a typo bro? Peace A.J.
DJsMX-3
Regular Member
Posts: 507
Joined: January 11th, 2004, 2:01 am
Location: Denmark

Re: Lot of parts to sell........QUICK..

Post by DJsMX-3 »

Nope no typo,so no american/canadian MX-3 have headlightangle-adjustmentswitch?? :confused2:

Or havent you seen one?thought it was standard..
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
LopezL
Junior Member
Posts: 1
Joined: February 19th, 2004, 2:01 am
Location: Utah

Re: Lot of parts to sell........QUICK..

Post by LopezL »

hey how much for the hood?
Machelski65
Regular Member
Posts: 269
Joined: July 20th, 2002, 2:01 am
Location: Hemlock,Michigan -USA-

Re: Lot of parts to sell........QUICK..

Post by Machelski65 »

Dennis I talked to few people, and no mx-3's in America or Canada have this. In USA it'd be illegal to have on your car. Lopez I don't have hood, or any front end body panels. Just front inner structure. PeAcE A.J.
Machelski65
Regular Member
Posts: 269
Joined: July 20th, 2002, 2:01 am
Location: Hemlock,Michigan -USA-

Re: Lot of parts to sell........QUICK..

Post by Machelski65 »

Sold few more things, but still plenty to sell. Heres few things I have that I'll price for you guys. Rear bumper cover good shape blaze red little faded. $50 plus shipping. Got a nice black dash pad $50 plus shipping. For pick up only I still have 2 doors, left and right rear quarter panels. 5 speed tranny, and mostly complete 1.8 V6 head gasket was blown. All engine accessories for sale. ECU for V6 and an ECU for 1.6 SOHC. VAF JE50 for sale. Complete factory airbox for V6. Set of GS 15inch rims with 195/60/R15 General XP2000 Directionals with lots of tread left... Front axles are sold, but have control arms, and rear suspension complete ect.... Make me offer would really like to see this stuff move.. Thanks, A.J.
Machelski65
Regular Member
Posts: 269
Joined: July 20th, 2002, 2:01 am
Location: Hemlock,Michigan -USA-

Re: Lot of parts to sell........QUICK..

Post by Machelski65 »

Still got stuff. Let me know, A.J.
Post Reply

Return to “MX-3 Related Items For Sale/Trade”