[GI] euro parts

curtklze · Post by **curtklze** » August 16th, 2010, 7:03 pm

Im going to be getting a small shipment of parts from germany in the next 6 months or so and would like to know what people might be interested in getting.

I can get headlights (glass left hand drive h4), mini sides, dash vents, stock euro fog lights to go with the cork sport presso bumper, maybe some stock euro front strut bars, stuff like that.

I cant get hoods, fenders, hatches, struts, stuff like that.

if you want something not listed just ask.

I have no prices yet, as im just wondering what people want the most of.

If you would like mini side, please state what colour you would like.

solo_ryder · Post by **solo_ryder** » August 16th, 2010, 8:54 pm

Bumper rebar?

projectmx · Post by **projectmx** » August 16th, 2010, 9:59 pm

i may be interested in those headlights or door sils if the price is right

JWMX3 · Post by **JWMX3** » August 17th, 2010, 12:03 am

i'd come get an oem strut bar from you

Evo_Spec · Post by **Evo_Spec** » August 17th, 2010, 2:02 am

i'd be interested in headlights, electroleveling one's would be awesome too.
maybe the German panel with drawer under steering wheel too.
and floor mats, AZ-3 one's if possible, but any mint floormats will work

_-Night-Shade-_ · Post by **_-Night-Shade-_** » August 17th, 2010, 4:57 am

I'd love some glass headlights, euro vents, and a fog light switch.

wytbishop · Post by **wytbishop** » August 17th, 2010, 10:15 am

If you can get your hands on 323F (BA chassis) V6 front spindles I will buy every pair you can find. I will pay up to $80 per pair. I only need the steering knuckles. I don't need the hubs or the bearings or the dust shields. If your guy over there can find a few pairs I will buy them all.

PATDIESEL · Post by **PATDIESEL** » August 17th, 2010, 10:20 am

Why would you not want the hub Wyt, aren't those the 5 lug hubs on a 323F?...

wytbishop · Post by **wytbishop** » August 17th, 2010, 10:35 am

They are, and I have no interest is swapping to 5 lug and I'm not going to sell them that way. Without the hub and the bearing it wil be half the shipping cost.

If buyers want to swap to 5 lug the BF hubs are a straight swap.

SteeleMX3 · Post by **SteeleMX3** » August 17th, 2010, 3:22 pm

Would love to get my hands on some dash vents and mini sides!

curtklze · Post by **curtklze** » August 17th, 2010, 5:12 pm

If you would like mini side, please state what colour you would like.

SteeleMX3 · Post by **SteeleMX3** » August 18th, 2010, 1:53 am

ahh sorry m8 didn't read properly, the colour is "tropical emerald metallic", or teal.

curtklze · Post by **curtklze** » August 24th, 2010, 6:59 pm

solo_ryder · Post by **solo_ryder** » August 24th, 2010, 7:15 pm

So no on the rebar? If not can you get me a front towhook?

curtklze · Post by **curtklze** » August 24th, 2010, 11:57 pm

solo_ryder wrote:So no on the rebar? If not can you get me a front towhook?

I should be able to get the rebar, do you need fog lights or brackets?

does the tow hook unbolt or is it welded?

MX-3.com

[GI] euro parts

[GI] euro parts

Re: [GI] euro parts

Re: [GI] euro parts

Re: [GI] euro parts

Re: [GI] euro parts

Re: [GI] euro parts

Re: [GI] euro parts

Re: [GI] euro parts

Re: [GI] euro parts

Re: [GI] euro parts

Re: [GI] euro parts

Re: [GI] euro parts

Re: [GI] euro parts

Re: [GI] euro parts

Re: [GI] euro parts