poor idle and stumble on accelleration after many new parts

4-Cyl. Technical/Performance Discussions
Post Reply
jtb
Junior Member
Posts: 1
Joined: May 15th, 2010, 3:11 pm
antispam: ~SPAM*SUX~

poor idle and stumble on accelleration after many new parts

Post by jtb »

Hi,
I've been looking at this forum for quite a while trying to figure out driveability problems on my daughter's car (94 mx3 1.6L DOHC auto). It has a hiccup at idle, where the ignition seems to drop out occasionally, and stumbles upon initial acceleration. I did the HEI mod, but that didn't solve it. I put in a new ECU, no joy. new plugs, tested ign wires, pulled codes, nothing. This is where it gets interesting -
I bought a used distributor and installed it (took out the HEI mod) - voila! runs great!... for a few hours. :crying: Now it is back to its same old self. :shrug:
So any ideas? Demonic possession?

Thanks in advance for any help,

James
User avatar
mxmikey
Regular Member
Posts: 99
Joined: March 22nd, 2010, 7:22 pm
antispam: No

Re: poor idle and stumble on accelleration after many new pa

Post by mxmikey »

I have the v6 and had a problem similar to it, although I had a code of a water temp sensor, also from time to time it had trouble starting.
93 GS/SE
Post Reply

Return to “4-Cyl. Technical/Performance”