I have read the FAQ's about cheap intakes but they really don't answer my question.
1994 Mx-3 GS 1.8L 6cyl
i want to replace the stock airbox with a cone air filter and heat shield, but there is the small tube attached to the airbox, it goes to the throttle body and i dont know how i'm going to re-attach it without the airbox.
If anyone could help me out with this, I would greatly appreciate it.
Air Intake
- umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: Air Intake
You'll have a port on the new intake piping to attach it to. Or you'll create that port. Or you'll use a breather for the hose.
1 of those options...
1 of those options...
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Air Intake
I enjoy swiping vacuum/washer fluid elbows from scrap yards.
Then I drill holes in intakes, and silicone them in, making nipples for lines such as that.
Then I drill holes in intakes, and silicone them in, making nipples for lines such as that.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
-
- Regular Member
- Posts: 50
- Joined: April 6th, 2010, 7:46 pm
- antispam: ~SPAM*SUX~
- Location: Edmonton AB, Canada
Re: Air Intake
Alright, thanks guys