Koolest Front Bumper For Mx-3 I Need The Name
Koolest Front Bumper For Mx-3 I Need The Name
i need the name for this
saw this on youtube here's the link
http://www.youtube.com/watch?v=-1s_d3HWzn4" onclick="window.open(this.href);return false;
at first i thought it was buddy2club but after cross refferencing it i realized it wasnt
i am serious about getting it but i know nothing about this front and this is the only one i have seen of it :/ help plz
saw this on youtube here's the link
http://www.youtube.com/watch?v=-1s_d3HWzn4" onclick="window.open(this.href);return false;
at first i thought it was buddy2club but after cross refferencing it i realized it wasnt
i am serious about getting it but i know nothing about this front and this is the only one i have seen of it :/ help plz
Re: Koolest Front Bumper For Mx-3 I Need The Name
its a bit blurry but im thinkin blitz
It only takes a single voice to start a revolution
Re: Koolest Front Bumper For Mx-3 I Need The Name
pretty sure its the pakfeifer front bumper
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: Koolest Front Bumper For Mx-3 I Need The Name
Looks a bit like the NPN bumper.
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: Koolest Front Bumper For Mx-3 I Need The Name
Its... blitz! no, its pakfeiter! no, its Mazdaspeed! no, its NPN! no, its drift! no, its superman! no, its CUSTOM!!!!!
haha.
so, who really knows? email the youtube user....
haha.
so, who really knows? email the youtube user....
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
-
- Regular Member
- Posts: 1083
- Joined: August 23rd, 2008, 12:09 am
- Location: Beamsville.
Re: Koolest Front Bumper For Mx-3 I Need The Name
lol its not oem so why do you need to know?
NEED PARTS INSTALLED? PM ME!
- _-Night-Shade-_
- Senior Member
- Posts: 2664
- Joined: January 15th, 2009, 8:00 pm
- Location: Toronto, Ontario, Canada
Re: Koolest Front Bumper For Mx-3 I Need The Name
Cuz OEM sucksprojectzemx3 wrote:lol its not oem so why do you need to know?
Re: Koolest Front Bumper For Mx-3 I Need The Name
I like his style...
Took the bp+t out of the mx and swapped it into a 95 escort wagon.
Re: Koolest Front Bumper For Mx-3 I Need The Name
Do not pass go._-Night-Shade-_ wrote:Cuz OEM sucks
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: Koolest Front Bumper For Mx-3 I Need The Name
BLASPHEMY! Epic fail sir... obviously you haven't been introduced to my international projects... please click the links in my signature_-Night-Shade-_ wrote:Cuz OEM sucks
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
Re: Koolest Front Bumper For Mx-3 I Need The Name
I'll bet that'll be quoted a lot lol
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: Koolest Front Bumper For Mx-3 I Need The Name
I'll take "Ugly Riced Out Crap" for $200 Bob!
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
- _-Night-Shade-_
- Senior Member
- Posts: 2664
- Joined: January 15th, 2009, 8:00 pm
- Location: Toronto, Ontario, Canada
Re: Koolest Front Bumper For Mx-3 I Need The Name
Hahaha don't get me wrong, the MX-3 is sexy right from the factory
I just have to laugh at you guys who religiously turn down any type of body modification that's not OEM
I admit there are people who don't have an eye for it and it ends up looking like crap, and THAT'S what I would call rice but then again there are some really good-looking body kits out there. My philosophy is that a car is the reflection of the owner and a body kit is a way to make it stand out visually from the rest of the crowd. Last time I looked in a car performance or sport compact mag (which was today) I didn't see anything that looked stock.
I just have to laugh at you guys who religiously turn down any type of body modification that's not OEM
I admit there are people who don't have an eye for it and it ends up looking like crap, and THAT'S what I would call rice but then again there are some really good-looking body kits out there. My philosophy is that a car is the reflection of the owner and a body kit is a way to make it stand out visually from the rest of the crowd. Last time I looked in a car performance or sport compact mag (which was today) I didn't see anything that looked stock.
Re: Koolest Front Bumper For Mx-3 I Need The Name
To me, it's like calling lil wayne hip hop. Just aint right.
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.