A LITTLE HELP
A LITTLE HELP
Hey guys, I am overwhelmed by the massive forum here and was wondering if anyone can help cut my search short. I got a 92 mx3 with the sohc motor. I read is easier to do a BPT swap in this car then the badass KLZE. I really want a quick winter beater and could find klze like nothing from all the souped up ford probes. Yet I heard it was very hard and that's all. No reason why and that's what I want to know. BTW the BPT is costy way too much for my car and my demand for it. Beside a dd is better off NA then FORCE INDUCTION right
Re: A LITTLE HELP
lol you're so gonna get flamed. haha.
is the stock engine the 1.6 4cyl or the 1.8 v6? so Rs or Gs?
if its the 1.6 the bpt is basically a drop in. you CAN put a klze in there but its highly advised you dont and it'd be easier to find a gs and put the klze in there.
is the stock engine the 1.6 4cyl or the 1.8 v6? so Rs or Gs?
if its the 1.6 the bpt is basically a drop in. you CAN put a klze in there but its highly advised you dont and it'd be easier to find a gs and put the klze in there.
Never be afraid to try...amateurs built the ark, professionals built the titanic.
Re: A LITTLE HELP
flamed? sorry new to these forums. Yea is the 1.6 4 cyl and i believe thats the rs. so why shouldn't i drop the klze? i know they fit in a gs better but why not a rs? to my understanding is just the mounts right?94drumx3 wrote:lol you're so gonna get flamed. haha.
is the stock engine the 1.6 4cyl or the 1.8 v6? so Rs or Gs?
if its the 1.6 the bpt is basically a drop in. you CAN put a klze in there but its highly advised you dont and it'd be easier to find a gs and put the klze in there.
Re: A LITTLE HELP
To start, subframe and mounts, harness, ecu, rad, etc. This is a winter beater/daily driver right? Go to a wrecker, get a bp from an escort, search this site for a proper airflow sensor/ecu combo, and you're done for under 500 bux. You'll be spending upwards of 1500 for a ZE and all the gs parts to swap to your car. Not to mention it is soooo much work!!!!!!!!! Listen to us dude, we know what's worthwhile and what isn't. Not tryin to pounce, but trust us.
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
- xtreme velocity
- Regular Member
- Posts: 201
- Joined: July 27th, 2006, 9:56 pm
- Location: Bartlesville, OK
Re: A LITTLE HELP
Hey. I cansay im still kinda new to the MX3 world. But dang i love these cars. To us here they are no beaters. If you stick around on this site you will be building it up before you know it. But when these guys say something you should do. Id do it. They know alot about these and have done about everything possible to them.
Current:
93 F-250 Diesel Coal Roller (For Sale)
06 RX-8 1.3 Rotary AT 6 speed (All looks)
79 Ford Courier 2.3 4cyl 5 speed (lil Pete)
Past:
05 Mazda RX-8 1.3 Rotary MT 6 speed
90 Mazda Miata 1.6L 5 speed 45k miles
94 MX-3 RS DOHC 5 speed 90k miles
93 F-250 Diesel Coal Roller (For Sale)
06 RX-8 1.3 Rotary AT 6 speed (All looks)
79 Ford Courier 2.3 4cyl 5 speed (lil Pete)
Past:
05 Mazda RX-8 1.3 Rotary MT 6 speed
90 Mazda Miata 1.6L 5 speed 45k miles
94 MX-3 RS DOHC 5 speed 90k miles
Re: A LITTLE HELP
i went the other way around went from v6 to bpt and yes the swap is a pain just because of sourcing parts. Id go bp and turbo that cheapest route. a bpt stock has nearly the klze horsepower and im getting 27city 33hwy mpg so it has that advantage
94 green rs
92 black gs project bpt. daily driven bpt in a gs...lovin the boost
92 black gs project bpt. daily driven bpt in a gs...lovin the boost
Re: A LITTLE HELP
thanks guy but i got something to ask the duratec 25 motor will swap to my understanding right. i have no worries about the work. love working on cars. i already got a long time project and this car i want to spend like 3g on it. i rather have this car then a honda anyways.
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: A LITTLE HELP
If it's not a Mazda K-series or B-series, it won't be a bolt in. If you want a Duratec 23, 30, 35, 37. A 350, 427, a rotary, a hemi; you can make them all fit, but it all will require custom work and it's uncharted territory, you'll be on your own.weapon5 wrote:thanks guy but i got something to ask the duratec 25 motor will swap to my understanding right. i have no worries about the work. love working on cars. i already got a long time project and this car i want to spend like 3g on it. i rather have this car then a honda anyways.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
Re: A LITTLE HELP
See I've been doing alot of research lately but can not find my answer. As a DD I surely can not relie on boosted engines, that is why I choose the klze but did some research to find out that the duratec is "supposly" the same motor just lable ford. I know Ford and their line up and mazda line up with K, and B series motor will swap in. What I was looking for was a answer to my question if this is the same series motors you find in the svt or not. DURATEC 25
Re: A LITTLE HELP
As earlier stated, the duratecs will not bolt in, I wish you luck if you decide to go that route.
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: A LITTLE HELP
A Duratec 25 is NOT a KL, it's a 60* v6 that's of a similar layout, but it's not from the same family. You can research all you want, but you can't find information on something that's never been done. The only one that's shared with it is the H-series from Suzuki (used in the Vitara) since it was co-developped with Mazda.weapon5 wrote:See I've been doing alot of research lately but can not find my answer. As a DD I surely can not relie on boosted engines, that is why I choose the klze but did some research to find out that the duratec is "supposly" the same motor just lable ford. I know Ford and their line up and mazda line up with K, and B series motor will swap in. What I was looking for was a answer to my question if this is the same series motors you find in the svt or not. DURATEC 25
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
Re: A LITTLE HELP
Thanks guys for all the help and info