Horse power for KL jspec 2.5 engine

[mx3 novice]

Could you know what is spec power for 2.5 jspec engine ?
More than 200hp or 160hp?

Ecu for jspec engine could be kl36 ?
Are there speed limiter for this ecu ?

[Mad Cow]

Search, it's been asked a million times.

[solo_ryder]

Could you know what is spec power for 2.5 jspec engine ?
More than 200hp or 160hp?

195-205 range

Ecu for jspec engine could be kl36 ?

kl31 or kl36

Are there speed limiter for this ecu ?

Yes, about 190kph or 110-115 MPH. You can get your k801 ecu chipped so that there is no limiter. Email probegtze @ hotmail.com

Please use the search or check FAQ

[Mnemonic]

This Thread is Clean. Lets keep it that way

[mx3 novice]

Could be 112 mph speed limit for kl31/36 ecu ?
And do you know rev limiter ?

thanks

[solo_ryder]

Ya the limiter is for kl31 and kl36.

I don't think there is a rev limiter on those ecus, but fuel cut may be @ 7600 area.

[Nd4SpdSe]

Regardless on what the rev and fuel cut-offs are, you don't want to rev your car more than 7000rpms if you want it to last, and if you don't, don't say we didn't warn you.

[Flyer]

Regardless on what the rev and fuel cut-offs are, you don't want to rev your car more than 7000rpms if you want it to last, and if you don't, don't say we didn't warn you.

Unless your name is leo323, then go nuts with the revs...

[Nd4SpdSe]

Regardless on what the rev and fuel cut-offs are, you don't want to rev your car more than 7000rpms if you want it to last, and if you don't, don't say we didn't warn you.

Unless your name is leo323, then go nuts with the revs...

It's all about the head work. It's got a full upgraded valvetrain with cams to match

[Daninski]

Cut the speed limiter wire. lol