Just Bought My 1st MX-3

4-Cyl. Technical/Performance Discussions
Redline322
Regular Member
Posts: 174
Joined: November 22nd, 2008, 2:20 pm
Location: Sydney, Nova Scotia

Re: Just Bought My 1st MX-3

Post by Redline322 »

He has a sohc B6, and he said he just wants it as an economy car. Either way, unless he decides to go turbo, he doesnt need a jdm trans, just a normal one will be fine if it ends up being a problem too.
93 323 Bp'd, Front and rear strut braces, Mx-3 seats, JDM headlights and grill SOLD
93 Mx-3 GS Curved-Neck KLZE, 5 speed Conversion, Fidanza Flywheel, Cross Drilled Rotors
User avatar
beefmobile
Regular Member
Posts: 53
Joined: July 4th, 2009, 1:11 am
antispam: No
Location: Jacksonville, NC
Contact:

Re: Just Bought My 1st MX-3

Post by beefmobile »

ok houston, we've got a problem!!!


when i pulled off the tranny, the clutch was STILL GOOD!

which made me go :? :? :?

so i put the tranny on the ground, reattached the axles and had a buddy hold em in place. i rotated the input shaft by hand, put it in gear, and it MOVED!!!!! you could hear it skipping/jumping inside.


the question i have now is: What cars do i need to be looking for in the junkyard that have a tranny that i can use??? i will need to go today....HELP PLZ!!
Cars:

2006 Mustang GT-- 12.5 @ 112 mph; NSR Stage II Cams, CMCV Delete Plates, GT500 Throttle Body, U/D pullies, JLT Intake, MAC Headers, O/R X Pipe, Borla Stingers, 4.10 Gears, Hurst Shifter, FRPP Springs, Steeda Strut Tower Brace, Power Steering Delete, Brembo Brakes, Chrome Grille, Cervinis Chin Spoiler, GT500 18" Wheels, Blacked Out Lights, and much much more.

2006 Mercury Mariner V6-DD
2006 Nissan Sentra 1.8 SE-Wife
1993 Mazda MX-3-BEATER!

United States Marine Corps
Redline322
Regular Member
Posts: 174
Joined: November 22nd, 2008, 2:20 pm
Location: Sydney, Nova Scotia

Re: Just Bought My 1st MX-3

Post by Redline322 »

Either an mx3 or 323 tranny will work, just use the axles you have now.
93 323 Bp'd, Front and rear strut braces, Mx-3 seats, JDM headlights and grill SOLD
93 Mx-3 GS Curved-Neck KLZE, 5 speed Conversion, Fidanza Flywheel, Cross Drilled Rotors
User avatar
beefmobile
Regular Member
Posts: 53
Joined: July 4th, 2009, 1:11 am
antispam: No
Location: Jacksonville, NC
Contact:

Re: Just Bought My 1st MX-3

Post by beefmobile »

what years?
Cars:

2006 Mustang GT-- 12.5 @ 112 mph; NSR Stage II Cams, CMCV Delete Plates, GT500 Throttle Body, U/D pullies, JLT Intake, MAC Headers, O/R X Pipe, Borla Stingers, 4.10 Gears, Hurst Shifter, FRPP Springs, Steeda Strut Tower Brace, Power Steering Delete, Brembo Brakes, Chrome Grille, Cervinis Chin Spoiler, GT500 18" Wheels, Blacked Out Lights, and much much more.

2006 Mercury Mariner V6-DD
2006 Nissan Sentra 1.8 SE-Wife
1993 Mazda MX-3-BEATER!

United States Marine Corps
User avatar
Ryan
Senior Member
Posts: 7198
Joined: April 7th, 2008, 1:06 pm
antispam: ~SPAM*SUX~
Location: Manitoba

Re: Just Bought My 1st MX-3

Post by Ryan »

Look in the engine bay. If it resembles yours, take the tranny. All will work, the range is massive. 89-98, I think. for 323/protege... plus many more non-mazdas...
Now with Moderator power!

Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
User avatar
beefmobile
Regular Member
Posts: 53
Joined: July 4th, 2009, 1:11 am
antispam: No
Location: Jacksonville, NC
Contact:

Re: Just Bought My 1st MX-3

Post by beefmobile »

well when the car was all together, the slipping was in all gears, and then when i sat in down and rotated it by hand, i'm starting to think it's the teeth on the input shaft.

i called a trans shop today and they said just to tear it apart and look at it would be $100....then if it is the shaft, that would be plus the parts and labor...

would it be cheaper just to go pull a trans out of a junker?
Cars:

2006 Mustang GT-- 12.5 @ 112 mph; NSR Stage II Cams, CMCV Delete Plates, GT500 Throttle Body, U/D pullies, JLT Intake, MAC Headers, O/R X Pipe, Borla Stingers, 4.10 Gears, Hurst Shifter, FRPP Springs, Steeda Strut Tower Brace, Power Steering Delete, Brembo Brakes, Chrome Grille, Cervinis Chin Spoiler, GT500 18" Wheels, Blacked Out Lights, and much much more.

2006 Mercury Mariner V6-DD
2006 Nissan Sentra 1.8 SE-Wife
1993 Mazda MX-3-BEATER!

United States Marine Corps
User avatar
Ryan
Senior Member
Posts: 7198
Joined: April 7th, 2008, 1:06 pm
antispam: ~SPAM*SUX~
Location: Manitoba

Re: Just Bought My 1st MX-3

Post by Ryan »

most definately. My local one charges $75 w/ core.
Now with Moderator power!

Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
User avatar
Inodoro Pereyra
Senior Member
Posts: 2067
Joined: March 11th, 2009, 3:44 pm
Location: Back in Buenos Aires, Argentina

Re: Just Bought My 1st MX-3

Post by Inodoro Pereyra »

I agree. However, be ready to pull more than one, make sure you inspect them carefully, and, most importantly, GET THE WARRANTY!
U28sIG5vdyB5b3UgYWxzbyBrbm93IGJhc2UgNjQuLi5odWg/DQpTSE9XIE9GRiEhIQ==

"The more I know man, the more I love my dog."

Diogenes of Sinope.
User avatar
beefmobile
Regular Member
Posts: 53
Joined: July 4th, 2009, 1:11 am
antispam: No
Location: Jacksonville, NC
Contact:

Re: Just Bought My 1st MX-3

Post by beefmobile »

ok i found a good tranny (no homo :lol: )

called up a few junk yards and found a donor car. car as a whole has 107k miles. they're charging me $250 to pull the tranny and the give me radio. not too bad considering where im at, one of the biggest rip off towns in america.

i'm still going to put the new clutch in. should be cruising by sunday :D
Last edited by beefmobile on July 17th, 2009, 7:16 pm, edited 1 time in total.
Cars:

2006 Mustang GT-- 12.5 @ 112 mph; NSR Stage II Cams, CMCV Delete Plates, GT500 Throttle Body, U/D pullies, JLT Intake, MAC Headers, O/R X Pipe, Borla Stingers, 4.10 Gears, Hurst Shifter, FRPP Springs, Steeda Strut Tower Brace, Power Steering Delete, Brembo Brakes, Chrome Grille, Cervinis Chin Spoiler, GT500 18" Wheels, Blacked Out Lights, and much much more.

2006 Mercury Mariner V6-DD
2006 Nissan Sentra 1.8 SE-Wife
1993 Mazda MX-3-BEATER!

United States Marine Corps
User avatar
Inodoro Pereyra
Senior Member
Posts: 2067
Joined: March 11th, 2009, 3:44 pm
Location: Back in Buenos Aires, Argentina

Re: Just Bought My 1st MX-3

Post by Inodoro Pereyra »

Congratulations.
$250 if they pull it out is not bad at all, and with a radio on top... good find!
U28sIG5vdyB5b3UgYWxzbyBrbm93IGJhc2UgNjQuLi5odWg/DQpTSE9XIE9GRiEhIQ==

"The more I know man, the more I love my dog."

Diogenes of Sinope.
User avatar
beefmobile
Regular Member
Posts: 53
Joined: July 4th, 2009, 1:11 am
antispam: No
Location: Jacksonville, NC
Contact:

Re: Just Bought My 1st MX-3

Post by beefmobile »

Ok so wtf.

i pay for the tranny last thursday and the swear it'll be ready for pickup on friday....well it wasnt. then they said latest saturday. never got a call. and their closed sunday.

then i call this morning and 'theyre still pulling it'......right?

then i call today after work and they are, yet, STILL pulling it.

i've been waiting since last thursday to put the damn thing in and they're just jerking me around. they SWEAR it will be ready for pickup tmrw at 10 am.

what do i do? demand some of the money back? this is bulls---!
Cars:

2006 Mustang GT-- 12.5 @ 112 mph; NSR Stage II Cams, CMCV Delete Plates, GT500 Throttle Body, U/D pullies, JLT Intake, MAC Headers, O/R X Pipe, Borla Stingers, 4.10 Gears, Hurst Shifter, FRPP Springs, Steeda Strut Tower Brace, Power Steering Delete, Brembo Brakes, Chrome Grille, Cervinis Chin Spoiler, GT500 18" Wheels, Blacked Out Lights, and much much more.

2006 Mercury Mariner V6-DD
2006 Nissan Sentra 1.8 SE-Wife
1993 Mazda MX-3-BEATER!

United States Marine Corps
User avatar
Inodoro Pereyra
Senior Member
Posts: 2067
Joined: March 11th, 2009, 3:44 pm
Location: Back in Buenos Aires, Argentina

Re: Just Bought My 1st MX-3

Post by Inodoro Pereyra »

Call them, and tell them you'll be there tomorrow 10 a.m. to either pick up your tranny or get a refund.
Tomorrow, go there. If they don't have the tranny, and they refuse to refund you, call the police. :evil:

You definitely have a lot more patience then me. I would've gone there and gotten either the tranny or the money back on Friday.
U28sIG5vdyB5b3UgYWxzbyBrbm93IGJhc2UgNjQuLi5odWg/DQpTSE9XIE9GRiEhIQ==

"The more I know man, the more I love my dog."

Diogenes of Sinope.
User avatar
beefmobile
Regular Member
Posts: 53
Joined: July 4th, 2009, 1:11 am
antispam: No
Location: Jacksonville, NC
Contact:

Re: Just Bought My 1st MX-3

Post by beefmobile »

well im not in a huge huge hurry, but it would be nice to have the car up and running


but i do not like getting fucked with.
Cars:

2006 Mustang GT-- 12.5 @ 112 mph; NSR Stage II Cams, CMCV Delete Plates, GT500 Throttle Body, U/D pullies, JLT Intake, MAC Headers, O/R X Pipe, Borla Stingers, 4.10 Gears, Hurst Shifter, FRPP Springs, Steeda Strut Tower Brace, Power Steering Delete, Brembo Brakes, Chrome Grille, Cervinis Chin Spoiler, GT500 18" Wheels, Blacked Out Lights, and much much more.

2006 Mercury Mariner V6-DD
2006 Nissan Sentra 1.8 SE-Wife
1993 Mazda MX-3-BEATER!

United States Marine Corps
User avatar
Inodoro Pereyra
Senior Member
Posts: 2067
Joined: March 11th, 2009, 3:44 pm
Location: Back in Buenos Aires, Argentina

Re: Just Bought My 1st MX-3

Post by Inodoro Pereyra »

Well, in my case, whether I'm in a hurry or not it's irrelevant. I believe in responsibility. I DEMMAND responsibility.
So, if you make a commitment and you don't keep it, we already have a problem, but in your second date I WILL be there, no phone calls, and you will either deliver as promised or lose me as a customer.
U28sIG5vdyB5b3UgYWxzbyBrbm93IGJhc2UgNjQuLi5odWg/DQpTSE9XIE9GRiEhIQ==

"The more I know man, the more I love my dog."

Diogenes of Sinope.
User avatar
beefmobile
Regular Member
Posts: 53
Joined: July 4th, 2009, 1:11 am
antispam: No
Location: Jacksonville, NC
Contact:

Re: Just Bought My 1st MX-3

Post by beefmobile »

hey this tranny came outta a car that had the 1.8 ltr......are there any plugs/wires/harnesses/connections that are different?
Cars:

2006 Mustang GT-- 12.5 @ 112 mph; NSR Stage II Cams, CMCV Delete Plates, GT500 Throttle Body, U/D pullies, JLT Intake, MAC Headers, O/R X Pipe, Borla Stingers, 4.10 Gears, Hurst Shifter, FRPP Springs, Steeda Strut Tower Brace, Power Steering Delete, Brembo Brakes, Chrome Grille, Cervinis Chin Spoiler, GT500 18" Wheels, Blacked Out Lights, and much much more.

2006 Mercury Mariner V6-DD
2006 Nissan Sentra 1.8 SE-Wife
1993 Mazda MX-3-BEATER!

United States Marine Corps
Post Reply

Return to “4-Cyl. Technical/Performance”