when i got it back in november of 08
current
Fresh rebuilt BP-T with less than 15k miles on it.
miata tubular header
garret t3 turbo
38mm tial wastegate dumped to atmosphere
2.5 inch catless turboback
apex-i n1 exhaust
bp performance fmic
ported gtx intake manifold
bpc8 323 gtr ecu
rx7 460cc injectors
msd 6al ignition box
msd blaster 3 coil
short shifter
poly bushings on sway bar, shifter, motor mounts
ground control coilovers
tokico s/r struts
v6 rear tie bar
gtx strut bar
rear strut bar
arp extended wheels studs
walbro 255 fuel pump
installing bp_performance fmic kit + synapse bov
stripped the interior to get it ready for new carpet + i installed momo hub and nrg 11.8" steering wheel
installed spyder auto projectors + hid's
got a new harness came with 4 wire o2 and i did a 4 wire tps swap
323 gtr ecu waiting to join the 460cc rx7 injectors along with a gtr vaf rx7 vaf
my t3/to4 waiting for a rebuild to go in when i get the etd manifold
awr f&r mounts waiting to go in awr engine mount for bg
i guess that is it for now i will add more when i get more work done
smoke187's 93 mx-3 rs-t worklog
smoke187's 93 mx-3 rs-t worklog
Last edited by smoke187 on March 28th, 2009, 5:12 pm, edited 1 time in total.
http://www.cardomain.com/id/smoke187" onclick="window.open(this.href);return false;
93 mx3 bp-t
93 protege lx
93 mx3 bp-t
93 protege lx
Re: smoke187's 93 mx-3 rs-t worklog
wow rules for work logs lol fixed
http://www.cardomain.com/id/smoke187" onclick="window.open(this.href);return false;
93 mx3 bp-t
93 protege lx
93 mx3 bp-t
93 protege lx
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: smoke187's 93 mx-3 rs-t worklog
Looks good man, that car looks like it goes pretty good.
I am a fan of white as well, looks clean
I am a fan of white as well, looks clean
- Murdastylez15
- Regular Member
- Posts: 62
- Joined: July 30th, 2008, 1:37 pm
- Contact:
Re: smoke187's 93 mx-3 rs-t worklog
man....what I wouldn't do to be your neighbor right now. I have been reading up on doing a turbo set up on my b6de and I'm only about 60% sure that I can do the job.
Dying to be TURBO CHARGED
Re: smoke187's 93 mx-3 rs-t worklog
Murdastylez15 wrote:man....what I wouldn't do to be your neighbor right now. I have been reading up on doing a turbo set up on my b6de and I'm only about 60% sure that I can do the job.
Right there with ya'
Love the look of the white with those wheels.
Re: smoke187's 93 mx-3 rs-t worklog
time for some updates old turbo setup was recently removed when the radiator sprung a leak so now i am putting together a new setup not shooting for high numbers maybe 280 whp
Custom ramhorn (being built)
t3/t4 turbo (needs rebuild)
550 or 600cc injectors
Megasquirt with no vaf (already have)
Custom braided oil Feed/Return
Custom coolant Feed/Return
some new parts were installed
custom speaker install made by neuman aka neuspeedescort
twm shifter + knob
awr racing passengers side mount
gauge pod made by neuspeedescort din mount ms plate made by Beerizfood on clubprotege
recent pictures of the car before the turbo parts got removed
Custom ramhorn (being built)
t3/t4 turbo (needs rebuild)
550 or 600cc injectors
Megasquirt with no vaf (already have)
Custom braided oil Feed/Return
Custom coolant Feed/Return
some new parts were installed
custom speaker install made by neuman aka neuspeedescort
twm shifter + knob
awr racing passengers side mount
gauge pod made by neuspeedescort din mount ms plate made by Beerizfood on clubprotege
recent pictures of the car before the turbo parts got removed
http://www.cardomain.com/id/smoke187" onclick="window.open(this.href);return false;
93 mx3 bp-t
93 protege lx
93 mx3 bp-t
93 protege lx