motor mounts

angrygumball316 · Post by **angrygumball316** » March 16th, 2009, 12:48 pm

will the v6 probe motor mounts work on the gs? im just wondering about the rear one that connects to the cross member

onlytrueromeo · Post by **onlytrueromeo** » March 16th, 2009, 12:51 pm

I believe the back one will, but not the front one - a search will get you the answer!

solo_ryder · Post by **solo_ryder** » March 16th, 2009, 1:08 pm

onlytrueromeo wrote:I believe the back one will, but not the front one - a search will get you the answer!

The probe front mount will work, the rear will not. The rear probe mount is a different design, the mx3 rear mount is specific to the MX-3 so you must use a stock mx3 mount or a aftermarket mx3 mount (Like AWR)

You may have to drill out the holes in your x-member though to accomodate the larger stud size of the probe mount. There is more info in the V6 FAQ about this.

onlytrueromeo · Post by **onlytrueromeo** » March 16th, 2009, 1:21 pm

^Heh yeah I was about to correct my post but he found it first! If you're going to buy new ones, get AWR ones!

angrygumball316 · Post by **angrygumball316** » March 16th, 2009, 1:54 pm

where do i get an awr mount?

angrygumball316 · Post by **angrygumball316** » March 16th, 2009, 1:59 pm

http://www.awrracing.com/store/product_ ... cts_id=393" onclick="window.open(this.href);return false; found it lol thanks guys

Post by **Mooneggs** » March 16th, 2009, 4:11 pm

AWR mounts FTW! Definately get the probe front mount over the mx-3 one since it is beefier and you don't need washers to make it fit! You just have to drill out the crossmember holes a little.

Daninski · Post by **Daninski** » March 16th, 2009, 8:15 pm

Go to Rockauto.com. Check out the parts by comparing the pictures. They're usually accurate.

MX-3.com

motor mounts

motor mounts

Re: motor mounts

Re: motor mounts

Re: motor mounts

Re: motor mounts

Re: motor mounts

Re: motor mounts

Re: motor mounts