[WTB] curved ze intake manifold.
-
- Regular Member
- Posts: 1083
- Joined: August 23rd, 2008, 12:09 am
- Location: Beamsville.
Re: [WTB] curved ze intake manifold.
I've got a KLZE and I'm not using the intake. Are you still looking?
Re: [WTB] curved ze intake manifold.
Well. Heres my custom rx-7 intake!
![Image](http://i685.photobucket.com/albums/vv211/rocky_bebb/birthday17016.jpg)
![Image](http://i685.photobucket.com/albums/vv211/rocky_bebb/birthday17016.jpg)
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
-
- Regular Member
- Posts: 813
- Joined: February 13th, 2008, 1:57 am
- Location: Dothan, AL.
- Contact:
Re: [WTB] curved ze intake manifold.
Since you have no idea... I'll talk to you before anyone else flames you. You gott watch out for some. They are bad bad people. - lolMx3Kid16 wrote:Well. Heres my custom rx-7 intake!
Anyways... Notice, the topic says Intake Manifold. Not just Intake. I don't know if you have much knoledge, but the Manifold is the thing that connects to the motor and to the Intake. I don't think he wants to buy your intake off your 4 banger. lmao
![Image](http://i138.photobucket.com/albums/q249/blakeab84/smoothmx3x75-1.jpg)
93 MX-3 2.5 KLZE - KL101 \\ H&R Springs \\ Short Shifter \\ 17" ADR Rims \\ 205/40/R17 Namkang Tires \\ Millenia Manifold \\ Rockford Amp \\ Rockford 12" Sub \\
--- K8 was my gateway drug.
Re: [WTB] curved ze intake manifold.
I Dont see anything custom about your intake lolMx3Kid16 wrote:Well. Heres my custom rx-7 intake!
EDIT: Saw the Air Filter, Does that make it Custom?
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: [WTB] curved ze intake manifold.
He has the RX7 VAF, which is a good upgrade for the pooptastic SOHC engine. However, he knows not about a ZE or the awesome power otherwise he would not have suggested an upgrade for a 4 banger in a V6 thread
Key points:
Pay attention!
SOHC = Pooptastic
KLZE = Awesomeness
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
Key points:
Pay attention!
SOHC = Pooptastic
KLZE = Awesomeness
Re: [WTB] curved ze intake manifold.
LOL!onlytrueromeo wrote:Key points:
Pay attention!
SOHC = Pooptastic
KLZE = Awesomeness
![Laughing :lol:](./images/smilies/icon_lol.gif)
-
- Regular Member
- Posts: 1083
- Joined: August 23rd, 2008, 12:09 am
- Location: Beamsville.
Re: [WTB] curved ze intake manifold.
what are you guys talking about thats exactly what i was looking for.
NEED PARTS INSTALLED? PM ME!
![Image](http://i453.photobucket.com/albums/qq253/projectzemx3/avator2.jpg)
![Image](http://i453.photobucket.com/albums/qq253/projectzemx3/avator2.jpg)
-
- Regular Member
- Posts: 1083
- Joined: August 23rd, 2008, 12:09 am
- Location: Beamsville.
Re: [WTB] curved ze intake manifold.
uhmm i want the intake manifold. and i only want it if i absolutelly cannot fit a straight neck. which is what i want to do.914klze wrote:I've got a KLZE and I'm not using the intake. Are you still looking?
NEED PARTS INSTALLED? PM ME!
![Image](http://i453.photobucket.com/albums/qq253/projectzemx3/avator2.jpg)
![Image](http://i453.photobucket.com/albums/qq253/projectzemx3/avator2.jpg)
-
- Regular Member
- Posts: 813
- Joined: February 13th, 2008, 1:57 am
- Location: Dothan, AL.
- Contact:
Re: [WTB] curved ze intake manifold.
Same for me. I'll take it as well if he doesn't want it. But, Only way I want it, is if I can't use the straight neck at all. Also, Why do people say, you cant use the straight neck? does it hit something or what?!projectzemx3 wrote:uhmm i want the intake manifold. and i only want it if i absolutelly cannot fit a straight neck. which is what i want to do.914klze wrote:I've got a KLZE and I'm not using the intake. Are you still looking?
![Image](http://i138.photobucket.com/albums/q249/blakeab84/smoothmx3x75-1.jpg)
93 MX-3 2.5 KLZE - KL101 \\ H&R Springs \\ Short Shifter \\ 17" ADR Rims \\ 205/40/R17 Namkang Tires \\ Millenia Manifold \\ Rockford Amp \\ Rockford 12" Sub \\
--- K8 was my gateway drug.
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: [WTB] curved ze intake manifold.
LOL You're asking if you can use the straight neck and you're already starting the swap??!? More research!!
No you cannot use it w/o some modifications, such as moving the brake booster back somehow, turning the TB upside down, griding the TB itself and or the bolts that go into master cylinder, raising the rear engine mount, or some magical way that the MOCA guys won't share with us.
You can also try to get a master cylinder w/ the lines running on the other side so that they won;t be in the way.
Long story short, its not so easily done, and a curve neck makes things much easier. I had the thing fint VERY tightly w/ just my TB upside down but that not only looked dumb it caused other problems.
No you cannot use it w/o some modifications, such as moving the brake booster back somehow, turning the TB upside down, griding the TB itself and or the bolts that go into master cylinder, raising the rear engine mount, or some magical way that the MOCA guys won't share with us.
![Evil or Very Mad :evil:](./images/smilies/icon_evil.gif)
Long story short, its not so easily done, and a curve neck makes things much easier. I had the thing fint VERY tightly w/ just my TB upside down but that not only looked dumb it caused other problems.
-
- Regular Member
- Posts: 813
- Joined: February 13th, 2008, 1:57 am
- Location: Dothan, AL.
- Contact:
Re: [WTB] curved ze intake manifold.
& with that said...
I'll take the curved neck Intake manny...
I knew there were some problems, but didn't know exactly what. I'm taking it, that post was referred to the other guy. I need to start collecting parts so I can go ahead and feel this bad boy. I've been waiting for soo long.
If I can't get this one, anyone else know where to find it?! I'm going to look on ebay now. thanks in advance.
I'll take the curved neck Intake manny...
I knew there were some problems, but didn't know exactly what. I'm taking it, that post was referred to the other guy. I need to start collecting parts so I can go ahead and feel this bad boy. I've been waiting for soo long.
If I can't get this one, anyone else know where to find it?! I'm going to look on ebay now. thanks in advance.
![Image](http://i138.photobucket.com/albums/q249/blakeab84/smoothmx3x75-1.jpg)
93 MX-3 2.5 KLZE - KL101 \\ H&R Springs \\ Short Shifter \\ 17" ADR Rims \\ 205/40/R17 Namkang Tires \\ Millenia Manifold \\ Rockford Amp \\ Rockford 12" Sub \\
--- K8 was my gateway drug.
Re: [WTB] curved ze intake manifold.
i know about the other engines, but before slamming my car take consideration im a 17 year old high school student and i dont make much money! trust me i would love to have the bpt or klze engine but just dont have the money for it.
CF Hood, Kenwood everything, 2.25 catback exhaust, H&R Springs, F&B Strut bars
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
My worklog: http://mx-3.com/phpBB3/viewtopic.php?f=46&t=68856" onclick="window.open(this.href);return false;
Good afternoon from the biggest Douch around;D
-
- Regular Member
- Posts: 813
- Joined: February 13th, 2008, 1:57 am
- Location: Dothan, AL.
- Contact:
Re: [WTB] curved ze intake manifold.
Power to the people, muh brothah!Mx3Kid16 wrote:i know about the other engines, but before slamming my car take consideration im a 17 year old high school student and i dont make much money! trust me i would love to have the bpt or klze engine but just dont have the money for it.
![Image](http://i138.photobucket.com/albums/q249/blakeab84/smoothmx3x75-1.jpg)
93 MX-3 2.5 KLZE - KL101 \\ H&R Springs \\ Short Shifter \\ 17" ADR Rims \\ 205/40/R17 Namkang Tires \\ Millenia Manifold \\ Rockford Amp \\ Rockford 12" Sub \\
--- K8 was my gateway drug.
- Ryan
- Senior Member
- Posts: 7198
- Joined: April 7th, 2008, 1:06 pm
- antispam: ~SPAM*SUX~
- Location: Manitoba
Re: [WTB] curved ze intake manifold.
I'm 17 and in high school... My BP is going in withing 3 weeks. I'm doing a refurb, and MAYBE some head work... I hope not though.
I work about 10 hours a week and make over $100 a week. It sustains me, and my mod monkey.
On topic: Tried probetalk? I'm sure they have a few.
I work about 10 hours a week and make over $100 a week. It sustains me, and my mod monkey.
On topic: Tried probetalk? I'm sure they have a few.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback