Help SuperK with Distributorless Ignition?

[SuperK]

So I was out shopping today, doing a bit of window shopping, a bit of pleasure perusing...

Oh, yes, I shop at junkyards...

and I came across this:




I wasn't aware that the 626 KL had a DIS and this interests me greatly!

I can get the DIS from the junkers for $75 dollars.

I understand I'm jumping into the dark here, has anyone attempted the swap?

The DIS has a CAS mounted on the bracket. It's a 4-wire plug to the DIS, and a two-wire to the CAS.

I'm currently doing some research on this, however if anyone has any information to share, I do need it.

[shameem]

For the DIS you will need three firing channels from the ECU - the mx3 ECU only has one - so you will have to do some complex magicery to turn one into three. Or swap the 626 ECU and the harness....

Also Megasquirt does DIS (wasted spark) very well.....

[SuperK]

I am running a KL ZE and a KL 36 ECU. I was talking to pat and he mentioned the signal from the ECU didn't have to be modified. Correct me if I am wrong.

[fowljesse]

The newer 626es (I think '97+?) have coilpacks.
What I'd like to know (in conjunction with your query), is if these coilpacks can be driven with an MSD 6A.

[mx3autozam]

nope. the msd 6a just makes the signal going to the coil stronger. It only has one channel. Megasquirt is pretty much the only way to amke this work on mx3's

[fowljesse]

Ooops. My question wasn't complete.. I meant; Assuming I have MSnS running the ciolpacks properly, could I use the MSD to step it up?

[nlsolja123]

instead of trying to make it stronger with add-ons i'd just buy a msd or accell 6 tower coilpack,

[Tommy]

How would the coil pack perform over the disty???