partinout

sikblue · Post by **sikblue** » July 14th, 2003, 1:13 am

partinout mx3...
wats bad..
drivers fender has small dent where it connects to bumper..
pass side door got shot up.. no good
motor is weak to due massive oil leak.. but most non moving parts are still good(IM ECU HARNESS ALL THE GOODS)...
I have a laguna blue mx with a stock white hood, and black stock bumper. i also have most parts from the car..
power windows but the motors are SLOW..
hatch is in good shape..5spd v6

MazdaManiacMx3 · Post by **MazdaManiacMx3** » July 14th, 2003, 1:26 am

any aftermarket body kits ?
if so I got first dibs

.

992mmx3 · Post by **992mmx3** » July 14th, 2003, 2:52 pm

I need an overflow tank, got one in good shape?

XxLuieLinesxX · Post by **XxLuieLinesxX** » July 14th, 2003, 3:16 pm

if you have power windows i need all the hardware, like the switches and the motors and all that stuff. If you have them let me know

sikblue · Post by **sikblue** » July 14th, 2003, 3:55 pm

mazdamaniac- No im sorry i dont, i do have a gs spoiler.. im swapping all the good stuff to the new mx992mmx3- yes i have one in good shape- name yur price n its yoursXxLuieLinesxX-the motors are slow.. but i have all the switches and things...name a price and its yours

dewthis · Post by **dewthis** » July 14th, 2003, 6:36 pm

a/c condensor, got one you are willing to part with?

mx34u2nve · Post by **mx34u2nve** » July 14th, 2003, 11:00 pm

k this is the stuff i need:signal light/ headlight arm (left) AND the electronic switch thign that the arm connects to.... hmm let me think ...... headlight relay.. daytime running light relay......umm that should probably do it. My car is a 93 v6 but i don't think that matters because i' think its all compatible. if you are willing to part those thigns out i will pay ASAP with paypal because i really need those parts fast.

mx34u2nve · Post by **mx34u2nve** » July 14th, 2003, 11:01 pm

oh ya and i need the gauge cluster glass. SO please reply to me with your asking prices.

MI-Archangel · Post by **MI-Archangel** » July 14th, 2003, 11:41 pm

hey plz pm me response as i wont be checking the board i neeed the rubber tube for the intake. i need the tube down from the tb to where the airbox is mines cracked.

2RotorsNaDream · Post by **2RotorsNaDream** » July 15th, 2003, 12:45 am

Do you have the drivers side rear quarter panel? If so, e-mail me with a price. Thanks. illakilla2g@aol.com

william · Post by **william** » July 15th, 2003, 6:41 pm

I could use a center console if its black and aslo a cargo cover if you have em...

992mmx3 · Post by **992mmx3** » July 17th, 2003, 8:12 pm

How about $15 usd for the overflow tank, cap and line that goes to the radiator cap area.

Spydie · Post by **Spydie** » July 17th, 2003, 8:16 pm

i need a disty

DaveRous · Post by **DaveRous** » July 17th, 2003, 11:05 pm

If you have the radio bezel, shift boot bezel, and all the vents and you are a 93 or lower give me a price. thanks.

phr34k · Post by **phr34k** » July 17th, 2003, 11:10 pm

Passenger side quarter panel exterior sheet metalhow much shipped to 72764

MX-3.com

partinout

partinout

Re: partinout

Re: partinout

Re: partinout

Re: partinout

Re: partinout

Re: partinout

Re: partinout

Re: partinout

Re: partinout

Re: partinout

Re: partinout

Re: partinout

Re: partinout

Re: partinout