KL36 electronic speed limit?

[DaMN]

I've made a swap to KLZE engine with JE50 vaf and KL36 ecu.
I tried severl times to chack the car in high speeds and I conldn't speed up over 190kmh, the car just stop to accelerate.
With other ecus I didn't had this problem (K8 ecu and KL03 ecu).

Is the KL36 have electronic speed limit?
If it does,is it possible to cancel it?

DaMN.

[rece]

someone else will tell you, but there is a wire that you need to cut on the factory harness that is connected to the ECU. I dont know which one cause mine is still there, but there are many that have cut this wire to remove the signal that goes to the ECU

[solo_ryder]

I've made a swap to KLZE engine with JE50 vaf and KL36 ecu.
I tried severl times to chack the car in high speeds and I conldn't speed up over 190kmh, the car just stop to accelerate.
With other ecus I didn't had this problem (K8 ecu and KL03 ecu).

Is the KL36 have electronic speed limit?
If it does,is it possible to cancel it?

DaMN.

190-195km/h seems to be the limit I hit with the kl36 ecu. That is around 110-115mph.

Here is how to remove that limiter:

http://www.mx-3.com/phpBB3/viewtopic.ph ... ed+limiter

[DaMN]

I had no idea it will be that much easy.
I'll do it and update you.

Thanks for the quick reply.

[Mooneggs]

please don't kill yourself... there really is no reason for you to be going that fast

[DaMN]

Hi Mooneggs thanks for your concern.
Don't you worry, I'm not driving that fast or fast at all most of the time.
It's just irritating that with my K8 engine I was able to go much faster then the KLZE.

BTW, I've cut the wire, I hope it's the right one, the car is still speed limited.
Tommorrow I'll rechack the wire.

I'll keep updating.

[DaMN]

By mistake I cut the wrong wire.
Anyway, now after I found the problem I'm more then happy to tell you that I don't have speed limiter anymore.

Thank you all for your help.

[Ryan]

out of curiosity, which one did you cut at first?