klze curved neck questions
-
- Junior Member
- Posts: 5
- Joined: August 19th, 2008, 8:53 pm
klze curved neck questions
hi i am new to this website and have a couple questions about the klze curved neck that i just bought for my car k well i just have to ask on my klze there is a little like 1/4 inch metel tube that comes out just under my radiator line under the disty does anyone know what thats for?
-
- Junior Member
- Posts: 5
- Joined: August 19th, 2008, 8:53 pm
Re: klze curved neck questions
here is a pic of it you can barley see it its the bottom circaled one now the top circled one whats that for my motor does not have it do i need it?
http://i532.photobucket.com/albums/ee32 ... 0021-1.jpg" onclick="window.open(this.href);return false;
http://i532.photobucket.com/albums/ee32 ... 0021-1.jpg" onclick="window.open(this.href);return false;
Re: klze curved neck questions
I believe it is there for emissions. It blows the excess oil back into the manifold instead of the atmosphere. Correct me if I'm wrong. Then at the T you should hook that up to the intake.
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: klze curved neck questions
Top one is a return line for oilfumes to the intake.
Bottem, can't see
Bottem, can't see
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: klze curved neck questions
I had the bottom on my old ZE motor. It was part of the coolant system IIRC. Get another pic for us to be sure, but I had the hold plugged with a bolt and some JB weld.
- msd-supermx3
- Regular Member
- Posts: 66
- Joined: July 6th, 2008, 2:08 pm
- Location: Calgary Alberta
Re: klze curved neck questions
the bottom hose is the one that goes to an automatic tranny, because it's a ZE and they came with AUTOs on curved necks.