Well, during my aisle shopping at the junkyards, I pulled two OEM Mazda wind deflectors.
One from a Millenia
One from a 626
The Millenia and the MX-3 Wind Deflectors are exactly similar. Both same width and height. Both mount points are similar.
![Image](http://i5.photobucket.com/albums/y169/SuperK86/My%20Car/CRW_6566.jpg)
The installed Wind Deflector is the Millenia, the one setting next to it is the MX-3.
The brackets supplied are a bit longer, but a pair of pliers and about 2 minutes on both solved that no problem.
The 626 Wind Deflector is a little bit longer and lower.
![Image](http://i5.photobucket.com/albums/y169/SuperK86/My%20Car/CRW_6563.jpg)
Black, front - 626; Green, back - Millenia.
![Image](http://i5.photobucket.com/albums/y169/SuperK86/My%20Car/CRW_6564.jpg)
Millenia
![Image](http://i5.photobucket.com/albums/y169/SuperK86/My%20Car/CRW_6565.jpg)
626
![Image](http://i5.photobucket.com/albums/y169/SuperK86/My%20Car/CRW_6552.jpg)
Millenia
![Image](http://i5.photobucket.com/albums/y169/SuperK86/My%20Car/CRW_6560.jpg)
626
I think the width is PERFECT for the MX-3.
![Image](http://i5.photobucket.com/albums/y169/SuperK86/My%20Car/CRW_6551.jpg)
It's exactly that position on the other side of the car:
I personally LOVE the look of the 626 Wind deflector. Some comparison shots:
![Image](http://i5.photobucket.com/albums/y169/SuperK86/My%20Car/CRW_6550.jpg)
626
![Image](http://i5.photobucket.com/albums/y169/SuperK86/My%20Car/CRW_6553.jpg)
Millenia
What do you think? This also means I have the OEM MX-3 Wind Deflector available if someone wants to purchase one.
I REALLY REALLY like the 626 one.
![Image](http://i5.photobucket.com/albums/y169/SuperK86/My%20Car/CRW_6561.jpg)
But... If the Wind Deflector is the same length as the MX-3 one, there's a good possibility the sunroof dimensions are the same.
This means I MUST return with a tape measure. The Millenia is glass, and this interests me greatly.