I do have a few pictures....
I spent a bit of money and time scrounging to get the interior back to stock. The shifter boot is a bit worn through at the top and the trip that surrounds the stereo is cracked. The cupholder works and everything is complete except for the left rear most panel in the hatch area...the hinged one that flips up. I stole it to replace the one in my other car.
The seats are mismatched but in good condition...though I doubt anyone will want to buy a seat off me unless they could pick it up. The door panels are pretty threadbare and the passenger side is slightly ripped at the top by the mirror...you know where they all rip when some meathead yanks on it to remove it.
If you need something specific let me know. $10 +shipping for any panel.
[FS] Parting out black 94' GS in Edmonton Alberta
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: [FS] Parting out black 94' GS in Edmonton Alberta
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
Re: [FS] Parting out black 94' GS in Edmonton Alberta
I am looking to replace my scratched, shabby panels with panels in mint condition.
In the hatch area, I need:
Rear panel
Right (passenger, one with the light) side panel
speaker covers
I also need the mid side panels, and the mid upper gray panels.
The A pillars?
How is the rear seat? Picture, possibly?
Oh, if the random plastic pieces behind the steering wheel column is in good shape, that'd be nice, too
The arm rest compartment, is the top in mint condition, or is it worn/kinda flakey rubbery?
And just for confirmation, the trim around the shifter is cracked at the DIN slots? Because that sucks if it is.
Is the K8 ECU chippable? Might want to check that.
How much for the ignition switch?
You might want to pull each and every little plastic tab off of the interior panels. I swear those things need to be treated like gold.
In the hatch area, I need:
Rear panel
Right (passenger, one with the light) side panel
speaker covers
I also need the mid side panels, and the mid upper gray panels.
The A pillars?
How is the rear seat? Picture, possibly?
Oh, if the random plastic pieces behind the steering wheel column is in good shape, that'd be nice, too
The arm rest compartment, is the top in mint condition, or is it worn/kinda flakey rubbery?
And just for confirmation, the trim around the shifter is cracked at the DIN slots? Because that sucks if it is.
Is the K8 ECU chippable? Might want to check that.
How much for the ignition switch?
You might want to pull each and every little plastic tab off of the interior panels. I swear those things need to be treated like gold.
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: [FS] Parting out black 94' GS in Edmonton Alberta
ok here's what I have so far. I would like everyone to confirm if they are still in. If you have questions I'll do my best to satisfy you all.
Jovian2k --- Spoiler
Nerd Racing --- D/S power window switch
Fowljesse --- Injectors
Mi|<E --- Hatch
Bluechro --- Muds & front rotors
hgallegos915 --- O2 sensor
Dragyn Vyrus --- both bumpers
Mikal --- front lip
Super K --- basically everything else
There's still lots of good stuff if anyone wants or needs anything.
Jovian2k --- Spoiler
Nerd Racing --- D/S power window switch
Fowljesse --- Injectors
Mi|<E --- Hatch
Bluechro --- Muds & front rotors
hgallegos915 --- O2 sensor
Dragyn Vyrus --- both bumpers
Mikal --- front lip
Super K --- basically everything else
There's still lots of good stuff if anyone wants or needs anything.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: [FS] Parting out black 94' GS in Edmonton Alberta
I have updated the top post to show everything up to date.
The bumpers are again available, but the lip is still pending. I have also not had confirmation from Bluechro on the muds and rotors or Mikal on the lip. Mikal, if you don't want the lip, let me know because others do.
Everyone else that I have come to terms with, please have your payment to my paypal acct angieandcharlie@shaw.ca" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false; sometime this weekend and I'll get the parts out ASAP.
I'm going to hang onto the carcass for another little bit because I'm hoping that a few more buyers might pop out of the woodwork.
Lots of good stuff here if you want it.
The bumpers are again available, but the lip is still pending. I have also not had confirmation from Bluechro on the muds and rotors or Mikal on the lip. Mikal, if you don't want the lip, let me know because others do.
Everyone else that I have come to terms with, please have your payment to my paypal acct angieandcharlie@shaw.ca" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false; sometime this weekend and I'll get the parts out ASAP.
I'm going to hang onto the carcass for another little bit because I'm hoping that a few more buyers might pop out of the woodwork.
Lots of good stuff here if you want it.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.