still don't know which KL i have

V6 Technical/Performance Discussions
Post Reply
studboy13
Regular Member
Posts: 96
Joined: April 26th, 2007, 3:00 am
Location: West Hills, CA

still don't know which KL i have

Post by studboy13 »

so i bought the engine from a place around my house. I paid 700 for it wwith 35,000 miles. When i brought it home i checked the codes on the block and they where DE codes, but someone said it still could be a ZE, it did not have a cover over the EGR (but did nolt have an EGR either) it has ZE throttle body codes and curved neck. KL01 cams as well. Is there any way that this could still be a ZE? THanks
92' GS KLDE, Cosmo Racing UDP, CAI, AWR Motor mounts solid, Pheno spacers . interior gutted, MTX Swap, unorthodox racing flywheel/ 4 paddle clutch. short shifter, SRD bushings, brembo cross-drilled rotors, corksport racings red stainless steel lines. megan escort springs, zx2 sturts, whiteline rear sway bar, rear strut bar.
User avatar
Dragyn Vyrus
Regular Member
Posts: 228
Joined: May 12th, 2008, 9:36 pm
Location: Sherwood Park, Alberta

Re: still don't know which KL i have

Post by Dragyn Vyrus »

it may have the ze throttle body but if the block is de then it most likely all is,
and kl01 cams are in the domestic kl's like the mellenia and the de

I do believe that i am right on this, but i could be wrong...
93 MX-3 ZE-GS - Sold
95 MX-3 RS - Bone stock winter car.
92 JDM turbo MR2 - SSQV, Cusco strut tower bar, ATS intercooler kit, Berk Exhuast, HKS EVC-S
User avatar
2fazed
Supporting Member
Posts: 1885
Joined: May 21st, 2002, 2:01 am
Location: La Selva Beach, California
Contact:

Re: still don't know which KL i have

Post by 2fazed »

You could have a Klze. There's 2 versions. Straight neck with ze heads, pistons, cams. And the Curved neck, which varys. It could have the Ze heads, De pistons, cams.

If you can exchange it with whom you bought it from. Ask for the straight neck Klze.
16 Hyundai Elantra Value Edition
06 Mazdaspeed6 2.3T
93 626 ES 2.5
92 Mx-3 RS 1.6
93 Mx-3 GS 2.5
93 Mx-3 RS 1.6
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:

Re: still don't know which KL i have

Post by hgallegos915 »

seems like a de or a millenia DE

there were two versions of the US millenia..


a DE with curved neck and a ze.


ive myself seen the millenia de.
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Post Reply

Return to “V6 Technical/Performance”