mx's with 18s
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: mx's with 18s
precidian, did you lower it, looks one of best mx3's and clean too, what are mods?
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
-
- Regular Member
- Posts: 420
- Joined: November 7th, 2000, 2:01 am
- Location: London, ON, Canada
- Contact:
Re: mx's with 18s
Thanks... the car was lowered....
Here is the short list of mods..... this was the setup as of last week. The car is having some work done on it for the new season....
• Jspec 2498cc • 6 cylinder • 24valve
• Custom Stainless Cat-Back Exhaust System
• Fireball Style Muffler
• NGK Ignition Wires
• SRD Polished Aluminum Battery Tie Down
• PRM Racing Jet Stream Intake System
• InJen coolant Overflow Catch Can
• B&M short throw shifter
• KYB GR2s gas struts
• Apex 1.75" lowering springs
• SRD billet aluminum cross member
• SRD aluminum rear lower tie bar
• Mazdaspeed upper strut mounts
• Rear aluminum strut brace
• J-spec front end conversion
• Headlight conversion - 9004 to J-spec H4s
• Euro spec front signals
• Altezza style tail lights
• Top-Mix front lip spoiler
• J-spec sideskirts
• Pakfiefer rear apron
• Shaved hood emblem and antenna
• Carbon fiber gas door
• Premier DEH-P840MP head unit
• 2-Rockford Fosgate Amps
• 1 farad Lightening capacitor
• Custom 13 speaker system
• Custom kick pods
• ADS 4IS mids and tweeters
• 3- JL Audio W0s
• ‘93 MX-3 bucket seats
• Retrim with black and green leather
• Sparco pedals
• Custom A-pillar gauge Pod
• Oil pressure gauge - Cobalt series
• Air/fuel gauge - Coblat series
• Custom gauge stainless gauge surround
• Custom a/c stainless surround
• Miata door release handles
• Tenzo shift handle
cheers,
Here is the short list of mods..... this was the setup as of last week. The car is having some work done on it for the new season....
• Jspec 2498cc • 6 cylinder • 24valve
• Custom Stainless Cat-Back Exhaust System
• Fireball Style Muffler
• NGK Ignition Wires
• SRD Polished Aluminum Battery Tie Down
• PRM Racing Jet Stream Intake System
• InJen coolant Overflow Catch Can
• B&M short throw shifter
• KYB GR2s gas struts
• Apex 1.75" lowering springs
• SRD billet aluminum cross member
• SRD aluminum rear lower tie bar
• Mazdaspeed upper strut mounts
• Rear aluminum strut brace
• J-spec front end conversion
• Headlight conversion - 9004 to J-spec H4s
• Euro spec front signals
• Altezza style tail lights
• Top-Mix front lip spoiler
• J-spec sideskirts
• Pakfiefer rear apron
• Shaved hood emblem and antenna
• Carbon fiber gas door
• Premier DEH-P840MP head unit
• 2-Rockford Fosgate Amps
• 1 farad Lightening capacitor
• Custom 13 speaker system
• Custom kick pods
• ADS 4IS mids and tweeters
• 3- JL Audio W0s
• ‘93 MX-3 bucket seats
• Retrim with black and green leather
• Sparco pedals
• Custom A-pillar gauge Pod
• Oil pressure gauge - Cobalt series
• Air/fuel gauge - Coblat series
• Custom gauge stainless gauge surround
• Custom a/c stainless surround
• Miata door release handles
• Tenzo shift handle
cheers,
Re: mx's with 18s
Hey Tom,
How much work was involved in shaving your antenna? The black trim on mine is cracked almost all the way through... and I'd like to get rid of it and run a FUBA style in back.
Thanks!
How much work was involved in shaving your antenna? The black trim on mine is cracked almost all the way through... and I'd like to get rid of it and run a FUBA style in back.
Thanks!
Hank
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
'92 MX-3 ZE *SOLD*
'05 RX-8 Touring
--All those who wander are not lost-- JRR Tolkien
-
- Forum Moderator
- Posts: 408
- Joined: October 10th, 2003, 2:01 am
- Location: Manchester, England
- Contact:
Re: mx's with 18s
precidian, Carbon fiber gas door. Whats that? Well I can take an educated guess, but Could you expand on this mod?? Ive never heard of it before.
Thats one nice looking ride mate, could you do any more to it??
Thats one nice looking ride mate, could you do any more to it??
-
- Regular Member
- Posts: 420
- Joined: November 7th, 2000, 2:01 am
- Location: London, ON, Canada
- Contact:
Re: mx's with 18s
Hank, the antenna was done by the bodyshop that was fixing that side of the car after an accident. Basically they removed the old antenna, welded a metal plate into the opening , grinded it down flush and then finished with some filler, primer and paint.
Mike, a friend of mine made the actual carbon fibre fuel door cover. Basically I found a second fuel door from an autowrecker and cut the metal skin of the door off and leaving only the framework and mechanism. Then I used windshield adhesive to actually affix the CF piece.
I will post pics once I get the car back from the stereo shop.
cheers,
Mike, a friend of mine made the actual carbon fibre fuel door cover. Basically I found a second fuel door from an autowrecker and cut the metal skin of the door off and leaving only the framework and mechanism. Then I used windshield adhesive to actually affix the CF piece.
I will post pics once I get the car back from the stereo shop.
cheers,
-
- Forum Moderator
- Posts: 408
- Joined: October 10th, 2003, 2:01 am
- Location: Manchester, England
- Contact:
Re: mx's with 18s
Cheers for clearing that one with me, for a moment I thought it was a CF door. Crazy.
Your cars sick, keep up the good.
Your cars sick, keep up the good.
-
- Regular Member
- Posts: 420
- Joined: November 7th, 2000, 2:01 am
- Location: London, ON, Canada
- Contact:
Re: mx's with 18s
Mike..... i'm in the process of trying to get my foglights working. I was wondering if you know if anyone might have the wiring diagrams or if you could help me out in getting a fog light switch.
Cheers,
Cheers,
Re: mx's with 18s
Looking for this Tom? http://www.finishlineperformance.com/cgi-bin/shopper?preadd=action&key=EL1017
later,
dee
later,
dee
'92 MIATA
'93 MX-3 BPT
'08 CX-9 AWD GRAND TOURING
'93 MX-3 BPT
'08 CX-9 AWD GRAND TOURING
Re: mx's with 18s
Also, are you going to Carlisle this year?
'92 MIATA
'93 MX-3 BPT
'08 CX-9 AWD GRAND TOURING
'93 MX-3 BPT
'08 CX-9 AWD GRAND TOURING
-
- Forum Moderator
- Posts: 408
- Joined: October 10th, 2003, 2:01 am
- Location: Manchester, England
- Contact:
Re: mx's with 18s
All parts for the MX are quite a bit more expensive than other countries, its because of the high TAX. However if you want me to get hold of one I will mail me let me know mszkilnyk@msn.com .
Also I came across these
<img src="http://www.iconstyling.com/variations/4 ... tches4.jpg" alt=" - " />
<img src="http://www.iconstyling.com/variations/4 ... tches3.jpg" alt=" - " />
<img src="http://www.iconstyling.com/variations/4 ... tches2.jpg" alt=" - " />
Savage styling ice blue switchgear. These are high quality polished switches with a blue 'neon' glow, warning lights use Red 'neon'. Switches are suitable for all levels of motor sport. These are manufactured using only the best materials in an ISO9001 approved factory. Switches measure 28mm diameter across the face.
Also I came across these
<img src="http://www.iconstyling.com/variations/4 ... tches4.jpg" alt=" - " />
<img src="http://www.iconstyling.com/variations/4 ... tches3.jpg" alt=" - " />
<img src="http://www.iconstyling.com/variations/4 ... tches2.jpg" alt=" - " />
Savage styling ice blue switchgear. These are high quality polished switches with a blue 'neon' glow, warning lights use Red 'neon'. Switches are suitable for all levels of motor sport. These are manufactured using only the best materials in an ISO9001 approved factory. Switches measure 28mm diameter across the face.
Re: mx's with 18s
Anyone know if 225/40/18's will fit on the mx??
My Cardomain Site<p><p> FBSS Air suspension, 12 gallon tank, viair 450 comp
Re: mx's with 18s
yo precedian nice wheels where a good place to pick up bad bys like dats
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: mx's with 18s
2004 called, they want you to give there post back...
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Re: mx's with 18s
You have to translate:Mnemonic wrote:2004 called, they want you to give there post back...
yas dawgm, wat my homei is spittin iz dats a old threadizzle ya knaw wut imma say
<a href="http://www.fodey.com/generators/animate ... .asp"><img src="http://r3.fodey.com/117ef9486659942269d ... 7601.1.gif" border=0 width="404" height="110" alt="Ninja!"></a>
- Mazdaspeed96743
- Regular Member
- Posts: 419
- Joined: February 5th, 2005, 3:00 pm
- Location: Kamuela, Hawaii
Re: mx's with 18s
Is this considered 18s?