Nagasaki Motors and a KLZE
- MX3-Life
- Regular Member
- Posts: 201
- Joined: January 14th, 2008, 11:33 pm
- Location: CFB Shilo, Manitoba
Nagasaki Motors and a KLZE
UPDATE:
http://www.nagasakijdmmotors.com/catalog/index.phpJDM" onclick="window.open(this.href);return false;
150-11451 Bridgeport Road, Richmond, BC. Canada V6X1T4
I have been looking at the 2.5L KLZE they have for $750... Then i called today and they said $650 so i was like sweet.
Basicly these are my problems:
1) Parts i will need for my Swap?
2) Who or How will i Swap?
3) What problems am I looking for on this KLZE (Wear/Tear) Before I Buy it?
4) Any info that will help me...
Thanks.
http://www.nagasakijdmmotors.com/catalog/index.phpJDM" onclick="window.open(this.href);return false;
150-11451 Bridgeport Road, Richmond, BC. Canada V6X1T4
I have been looking at the 2.5L KLZE they have for $750... Then i called today and they said $650 so i was like sweet.
Basicly these are my problems:
1) Parts i will need for my Swap?
2) Who or How will i Swap?
3) What problems am I looking for on this KLZE (Wear/Tear) Before I Buy it?
4) Any info that will help me...
Thanks.
Last edited by MX3-Life on April 15th, 2008, 11:20 pm, edited 5 times in total.
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: JDM Source
I have recevied about 3 motors from these guys, the first one being not as clean as I hoped internally (I sent back) Second one I got was a straightneck that was pretty clean internally, and my newer mx and the last engine was a DE with ZE IM (my fault, I didnt check head codes) but the motor is exceptionally clean. I highly suggest that you go in there and choose a motor and buy it, then you will at least know that you picked the motor and that it is a true KLZE if that is what you want. Just remember the head codes WHICH i FORGOT TO DO(kl31-1a1 and kl31-101 - not kl-101 and kl1a1).
The owner shoaib is real slick so be careful, dont let him talk you into anything. Another option for you, since you are in the Vancouver area is nagasaki motors in Richmond. They sell curved necks for about 700 bucks, 900$ is to much for a ZE nowadays, even if its a straight neck. Check the link:
http://www.nagasakijdmmotors.com/catalog/index.php
The owner shoaib is real slick so be careful, dont let him talk you into anything. Another option for you, since you are in the Vancouver area is nagasaki motors in Richmond. They sell curved necks for about 700 bucks, 900$ is to much for a ZE nowadays, even if its a straight neck. Check the link:
http://www.nagasakijdmmotors.com/catalog/index.php
- ElectricEnergy
- Regular Member
- Posts: 489
- Joined: August 15th, 2006, 12:37 am
- Location: Saskatoon SK, Canada
Re: JDM Source
I bought my ZE from these guys also. Although I think I came out alright, I still don't really like them. The guy is really slick just like solo said. After shipping and all the bulls--- charges they throw on top I ended up spending $1200 on my motor.
David
David
KL-ZE Swap - OBX SS Headers - 2.5" Exhaust - Falken Azenis Tires - H&R Springs - ZX-2 Struts - CAI - Front & Rear Tower Bar - AWR Motor Mounts - 100hp wet shot (yet to be tested)
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: JDM Source
Now your getting somewhere, make sure you go check it out before you buy it!
- mx3autozam
- Senior Member
- Posts: 2950
- Joined: September 24th, 2005, 9:09 pm
- Location: Kitchener
Re: JDM Source
i was gunna buy one from nagasaki but when i got there the guy wasnt there! i called in advance and told him im was coming to look at and buy a ze. when i phoned him he said he was in downtown van and he didnt know when he was going to be back i was pretty pissed he would just ditch like that even when i told him i was coming(i was only 30min away) i wasnt able to wait either because i had to be back in kelowna that night now for a second trip down to van...
1992 Mx-3 GS White
1980 Spyder Monza(Torn Apart ATM)
1980 Spyder Monza(Torn Apart ATM)
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: JDM Source
Ask for a discount, tell him you drove from ktown to get there, that is like 100 bones gas there and back
- MX3-Life
- Regular Member
- Posts: 201
- Joined: January 14th, 2008, 11:33 pm
- Location: CFB Shilo, Manitoba
Re: JDM Source
I believe it is a straight but i will check on that,
I'm going to go look at it soon and i was just wondering what i should look for and watch out for?
And what problems/upgrades will i have to worry about if i do upgrade to a KLZE?
Updated the Tittle of this topic and the info.
Thanks.
I'm going to go look at it soon and i was just wondering what i should look for and watch out for?
And what problems/upgrades will i have to worry about if i do upgrade to a KLZE?
Updated the Tittle of this topic and the info.
Thanks.
- MX3-Life
- Regular Member
- Posts: 201
- Joined: January 14th, 2008, 11:33 pm
- Location: CFB Shilo, Manitoba
Re: Nagasaki Motors and a KLZE
Trick is if i do get it, How im gonna swap it... I could attempt it myself but i woudln't trust myself...
- umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: Nagasaki Motors and a KLZE
Looks like you'll have to coax Solo_Ryder into a weekend adventure...MX3-Life wrote:Trick is if i do get it, How im gonna swap it... I could attempt it myself but i woudln't trust myself...
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: Nagasaki Motors and a KLZE
Haha if you pay me well and provide me with some woman I may have to make a weekend trip
HAHA
BTW, that price is most likely for a curve necker, the straights usually go for 800 give or take from them. I called them about it once. If you want top performance go with the straight neck, but you will need to find a curve neck IM (lots floating around)
PM me man and I will help you make up a list of parts and what not that you will need.
HAHA
BTW, that price is most likely for a curve necker, the straights usually go for 800 give or take from them. I called them about it once. If you want top performance go with the straight neck, but you will need to find a curve neck IM (lots floating around)
PM me man and I will help you make up a list of parts and what not that you will need.
- MX3-Life
- Regular Member
- Posts: 201
- Joined: January 14th, 2008, 11:33 pm
- Location: CFB Shilo, Manitoba
Re: Nagasaki Motors and a KLZE
Lol... Which do you want more of? Money? Or Women?
Yeah ill PM you as soon as I'm done watching Hells Kitchen
Yeah ill PM you as soon as I'm done watching Hells Kitchen