Need new front drive axles, K-8 Axles? Can i upgrade??

V6 Technical/Performance Discussions
Post Reply
irocthaDOHC
Junior Member
Posts: 29
Joined: February 10th, 2008, 11:39 am

Need new front drive axles, K-8 Axles? Can i upgrade??

Post by irocthaDOHC »

Hi i have a 92 GS-R with many problems, one of which being i need new drive axles.. should i just get axles for a k-8 or is there anything i could upgrade to? from what i gather a probe or mx-6 axle will not fit...


Thanks in advance
User avatar
stereoking15
Regular Member
Posts: 326
Joined: August 16th, 2005, 3:51 pm
Location: Portland, OR USA!!!

Re: Need new front drive axles, K-8 Axles? Can i upgrade??

Post by stereoking15 »

the new axles from napa are pretty good they are heat treated to accept more punishment and have a lifetime warranty bout 80-110 u.s.d . but if you need extensively bullit proof axles corksport has em for bout 600 u.s.d
94 gs ze swapped,front mount oil cooler,b&g springs, kyb gr2 struts, vris deleted, gutted, racing 4 point harness. centerforce dual friction clutch, BREMBO ROTORS X4, CARBOTECH XP10 front pads, ebc green stuff rear PADS, corksport brake lines & clutch line, hei mod w/ msd blaster 3, MAZDASPEED motor mounts, B&M short shifter, M-FACTORY LSD, Carbon fiber hatch with lexan window.
irocthaDOHC
Junior Member
Posts: 29
Joined: February 10th, 2008, 11:39 am

Re: Need new front drive axles, K-8 Axles? Can i upgrade??

Post by irocthaDOHC »

THANKS STEREO
User avatar
mx3autozam
Senior Member
Posts: 2950
Joined: September 24th, 2005, 9:09 pm
Location: Kitchener

Re: Need new front drive axles, K-8 Axles? Can i upgrade??

Post by mx3autozam »

I ahve napa remans and there ure garbage, and I also believe they are giving me protege ones that are too short and when I turn the joint pops out of the inner cup. Thats not right. I dono but maybe the Napa new ones are good. But i do not want to wasre more money on axles that might be junk again.

Anyone tried axles from part source or something?
93 Mazda MX3 KLZE Turbo
User avatar
mitmaks
Senior Member
Posts: 8704
Joined: September 10th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Spokane, WA
Contact:

Re: Need new front drive axles, K-8 Axles? Can i upgrade??

Post by mitmaks »

http://www.autopartswarehouse.com/searc ... 66236+9274" onclick="window.open(this.href);return false;
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
Image
User avatar
mx3boyze
Regular Member
Posts: 379
Joined: September 5th, 2008, 7:22 pm

Re: Need new front drive axles, K-8 Axles? Can i upgrade??

Post by mx3boyze »

http://www.a1cvtech.com" onclick="window.open(this.href);return false; GREAT Customer support and awsome products.
User avatar
stereoking15
Regular Member
Posts: 326
Joined: August 16th, 2005, 3:51 pm
Location: Portland, OR USA!!!

Re: Need new front drive axles, K-8 Axles? Can i upgrade??

Post by stereoking15 »

if you want some beastly axles then here you go

http://www.horsepowerfreaks.com/perform ... rain/Axles
94 gs ze swapped,front mount oil cooler,b&g springs, kyb gr2 struts, vris deleted, gutted, racing 4 point harness. centerforce dual friction clutch, BREMBO ROTORS X4, CARBOTECH XP10 front pads, ebc green stuff rear PADS, corksport brake lines & clutch line, hei mod w/ msd blaster 3, MAZDASPEED motor mounts, B&M short shifter, M-FACTORY LSD, Carbon fiber hatch with lexan window.
Post Reply

Return to “V6 Technical/Performance”