[FS] part out B6 DOHC motor/tranny
- mazdax3speed
- Regular Member
- Posts: 164
- Joined: February 12th, 2007, 6:34 pm
[FS] part out B6 DOHC motor/tranny
ill try this again, MAKE OFFERS on any parts you want that are left
the dump wont take motors here, i have no use for any of these parts
the motor has unknown mileage on it because it is a replacement (put in by mazda) before i bought the car
ran perfectly fine (drove hard) with only a small leak around the dizzy from the VC gasket and small oil pan gasket leak
:already sold:
ECU
Harness (motor/fuel)
Intake Manifold
Valve Cover
Dizzy
Throttle Body
everything is shipping out of NC 27712
the dump wont take motors here, i have no use for any of these parts
the motor has unknown mileage on it because it is a replacement (put in by mazda) before i bought the car
ran perfectly fine (drove hard) with only a small leak around the dizzy from the VC gasket and small oil pan gasket leak
:already sold:
ECU
Harness (motor/fuel)
Intake Manifold
Valve Cover
Dizzy
Throttle Body
everything is shipping out of NC 27712
Orange 95' BPT GT28r, MSII on the way
Re: [FS] part out B6 DOHC motor/tranny
i will buy your intake valves, but will need shipping to UK. if you can do that then PM me an i'll make you an offer.
1997 1.6 16v DOHC uk spec gs, 17" wolfrace triad, 2.0l probe s/s header magnaflow high flow cat, powerflow custom catback, CAI, zx2 struts w/ -40mm lesjofors springs
http://www.uk-mx3.com" onclick="window.open(this.href);return false;
http://www.uk-mx3.com" onclick="window.open(this.href);return false;
- mazdax3speed
- Regular Member
- Posts: 164
- Joined: February 12th, 2007, 6:34 pm
Re: [FS] part out B6 DOHC motor/tranny
replied to all PMs
some stuff waiting to be taken off
also i am moving the car to a bigger garage, but don't want to fill it up with all my old stuff
make offers
head
crank
pending sale
some stuff waiting to be taken off
also i am moving the car to a bigger garage, but don't want to fill it up with all my old stuff
make offers
head
crank
pending sale
Orange 95' BPT GT28r, MSII on the way
- Savin
- Regular Member
- Posts: 1580
- Joined: November 18th, 2007, 3:05 pm
- Location: Crown Point, IN (Chicago area)
- Contact:
Re: [FS] part out B6 DOHC motor/tranny
you wouldn't by chance have a working throttle positioning sensor off the DOHC would you?
'95 MX-3 RS - Project "Déjà Vu" Destined for the scrapyard.
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
Re: [FS] part out B6 DOHC motor/tranny
I sent you a PM about the transmission.
Vol
Vol
Current Hypermiler, future EcoModder.
- mazdax3speed
- Regular Member
- Posts: 164
- Joined: February 12th, 2007, 6:34 pm
Re: [FS] part out B6 DOHC motor/tranny
replying to PMs
couldnt make it home this weekend to tear apart some older stuff
TPS is gone already
Tranny is in fine shape, clutch is shot but doesnt grid
really would like to not ship it that far, but ill see what i can do
couldnt make it home this weekend to tear apart some older stuff
TPS is gone already
Tranny is in fine shape, clutch is shot but doesnt grid
really would like to not ship it that far, but ill see what i can do
Orange 95' BPT GT28r, MSII on the way
Re: [FS] part out B6 DOHC motor/tranny
Anything been happening with this? Still want the power steering pump.
1995 MX-3 1.6 DOHC 5SP.
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: [FS] part out B6 DOHC motor/tranny
I might be interested in the MAF if it is still available. Please contact me when you get a chance.
- mazdax3speed
- Regular Member
- Posts: 164
- Joined: February 12th, 2007, 6:34 pm
Re: [FS] part out B6 DOHC motor/tranny
Ok, very sorry guys, school got out of hand for a while and im in the process of signing a lease and moving, yada yada
to any questions i may not have answered yet
TPS went with the intake manifold and TB
I do have a working PS pump, its yours for $25+shipping if you still want it
i do have the MAF, you do understand i guess that since this is the DOHC it is NOT the trap door type. its yours for $25+shipping if you want it as well
I saw you sent me a PM about the head, mileage is unknown, didnt burn any oil, did however get a slight tick most times after taking it out to the track, but for some reason it would go away after a day of normal driving. id really like to avoid shipping the head, but $70+shipping sound about right? im not sure what its worth, if you can come pick it up in NC ill let it go for $50
i will send out PMs later on tonight, incase you dont see my reply
again sorry for the ridiculously long wait time for a reply, to be honest i completely forgot about this, and was about to just junk the motor
to any questions i may not have answered yet
TPS went with the intake manifold and TB
I do have a working PS pump, its yours for $25+shipping if you still want it
i do have the MAF, you do understand i guess that since this is the DOHC it is NOT the trap door type. its yours for $25+shipping if you want it as well
I saw you sent me a PM about the head, mileage is unknown, didnt burn any oil, did however get a slight tick most times after taking it out to the track, but for some reason it would go away after a day of normal driving. id really like to avoid shipping the head, but $70+shipping sound about right? im not sure what its worth, if you can come pick it up in NC ill let it go for $50
i will send out PMs later on tonight, incase you dont see my reply
again sorry for the ridiculously long wait time for a reply, to be honest i completely forgot about this, and was about to just junk the motor
Orange 95' BPT GT28r, MSII on the way
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: [FS] part out B6 DOHC motor/tranny
Let me know how much shipping would be to:
John Romeo
4 Washington St
Potsdam, NY 13676
John Romeo
4 Washington St
Potsdam, NY 13676
- mazdax3speed
- Regular Member
- Posts: 164
- Joined: February 12th, 2007, 6:34 pm
Re: [FS] part out B6 DOHC motor/tranny
i can do the PS for $35, assuming OK is Oklahoma?
shipping to NY...for that lets just say $5
i will be at NOPI this weekend, but i will make sure everything is in boxes first before i leave, and i can ship them out sometime next week
my paypal is blaklabelsk8r2003@yahoo.com" onclick="window.open(this.href);return false; if you want to send it
but like i said, it will probably be wednesday before i can get them shipped you
shipping to NY...for that lets just say $5
i will be at NOPI this weekend, but i will make sure everything is in boxes first before i leave, and i can ship them out sometime next week
my paypal is blaklabelsk8r2003@yahoo.com" onclick="window.open(this.href);return false; if you want to send it
but like i said, it will probably be wednesday before i can get them shipped you
Orange 95' BPT GT28r, MSII on the way