The New Toy/Toys Are Finished
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
The New Toy/Toys Are Finished
The New Toy:
2.4ghz Core2 Quad Q6600 OC to 3.0ghz\
ASUS P5K-E LGA 775 Intel P35 ATX Intel Motherboard
2x 2gig DDR2 6400 hyperx
2x 500gig Western Digital 10k Sata hard drives
CoolMaster 550w Power Supply
Few other little goodies waiting to go in
and my old computer became a media center
2.4ghz Core2 Quad Q6600 OC to 3.0ghz\
ASUS P5K-E LGA 775 Intel P35 ATX Intel Motherboard
2x 2gig DDR2 6400 hyperx
2x 500gig Western Digital 10k Sata hard drives
CoolMaster 550w Power Supply
Few other little goodies waiting to go in
and my old computer became a media center
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
-
- Regular Member
- Posts: 813
- Joined: February 13th, 2008, 1:57 am
- Location: Dothan, AL.
- Contact:
Re: The New Toy/Toys Are Finished
I take it you've just built the superman of computers?
93 MX-3 2.5 KLZE - KL101 \\ H&R Springs \\ Short Shifter \\ 17" ADR Rims \\ 205/40/R17 Namkang Tires \\ Millenia Manifold \\ Rockford Amp \\ Rockford 12" Sub \\
--- K8 was my gateway drug.
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: The New Toy/Toys Are Finished
lol wouldn't say superman more like batman
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
-
- Regular Member
- Posts: 813
- Joined: February 13th, 2008, 1:57 am
- Location: Dothan, AL.
- Contact:
Re: The New Toy/Toys Are Finished
Basiclly, one bad mo fo com-proot-er?
93 MX-3 2.5 KLZE - KL101 \\ H&R Springs \\ Short Shifter \\ 17" ADR Rims \\ 205/40/R17 Namkang Tires \\ Millenia Manifold \\ Rockford Amp \\ Rockford 12" Sub \\
--- K8 was my gateway drug.
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: The New Toy/Toys Are Finished
Pretty much, I do a lot of rendering working with After Effects so I needed the power so I didn't have to sit here for hours waiting:)
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
-
- Regular Member
- Posts: 813
- Joined: February 13th, 2008, 1:57 am
- Location: Dothan, AL.
- Contact:
Re: The New Toy/Toys Are Finished
Hmm... My comp is slow. REALLY slow, (baby voice)Help!
93 MX-3 2.5 KLZE - KL101 \\ H&R Springs \\ Short Shifter \\ 17" ADR Rims \\ 205/40/R17 Namkang Tires \\ Millenia Manifold \\ Rockford Amp \\ Rockford 12" Sub \\
--- K8 was my gateway drug.
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: The New Toy/Toys Are Finished
Sweet. That's just like the one my roommate built for me. He's an engineer at Intel, and he got me some chip that hasn't been released.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- onlytrueromeo
- Senior Member
- Posts: 2756
- Joined: May 16th, 2007, 10:05 pm
- Location: Albany, NY
Re: The New Toy/Toys Are Finished
With certain server mobo's you can have a dual quad core computer......but that costs like 10k minimum...haha.
I love computers. I'm runnin an AMD 64 x2 5600+ OC'd to 3.2 ghz w/ only 3 gigs of ram. I didnt splurge on my video card I just got a decent SLI 256mb dx10....I shoulda gotten one of the 320's because they have more than 2x the memory interface that mine does . I wanted to spend the extra $100+ on my car though.
I love computers. I'm runnin an AMD 64 x2 5600+ OC'd to 3.2 ghz w/ only 3 gigs of ram. I didnt splurge on my video card I just got a decent SLI 256mb dx10....I shoulda gotten one of the 320's because they have more than 2x the memory interface that mine does . I wanted to spend the extra $100+ on my car though.
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: The New Toy/Toys Are Finished
nice:)
I had that motherboard, gave me nothing but grief though. Got the same processor too though not OC which isn't like me! I use my set up for protools for recording my band. Bet those HDs were a hard hit with 10k. I'm just running 4 cheaper ones instead - protools divides the tracks onto each of them
I had that motherboard, gave me nothing but grief though. Got the same processor too though not OC which isn't like me! I use my set up for protools for recording my band. Bet those HDs were a hard hit with 10k. I'm just running 4 cheaper ones instead - protools divides the tracks onto each of them
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: The New Toy/Toys Are Finished
It wasn't to bad on the hard drive (newegg is your friend when its on sale) the WD 500gig @7200 were only 50 a piece so i might pick up a few of those, I'd really like to get a raid controller but thats another 350 so for now onboard will work, and i'm hearing mixed reviews about the motherboard, I'm still in messing with the bios trying to get it all 1:1 or as close as i can. This seems to be a pretty decent setup so far, though I just started using vista and well its starting to annoy me but i'm still messing with things in it.marcdh wrote:nice:)
I had that motherboard, gave me nothing but grief though. Got the same processor too though not OC which isn't like me! I use my set up for protools for recording my band. Bet those HDs were a hard hit with 10k. I'm just running 4 cheaper ones instead - protools divides the tracks onto each of them
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: The New Toy/Toys Are Finished
UPGRADE just upgraded to 4x 1gig ddr2 8500 kingston dual hyper X 1066mhz
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
- se7en
- Regular Member
- Posts: 1264
- Joined: August 29th, 2007, 1:47 am
- Location: Canada(brrrr, it's cold)
- Contact:
Re: The New Toy/Toys Are Finished
lol, I am using vista on my laptop, and I can't believe that they released this piece of junk....
graphics problems, and shutdowns for no reason... grr craprosoft really dropped the ball on this one.
7
graphics problems, and shutdowns for no reason... grr craprosoft really dropped the ball on this one.
7
1992 mx-3 GS-T, 10-12psi, T3/t4 hybrid, Turbosmart WG, AFPR, SSAC TURBO pipes, MSD Blaster coil, K&N, AEM W/B, MSnS(full standalone), 225Whp street tuned(10psi), 245Whp (12psi)(300bhp!!!)
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: The New Toy/Toys Are Finished
yea i'm not to happy with it at the moment but then again everyone said the same thing about xp give it time it'll get better, remember microcrap likes to release crap 1st and fix it later
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
- se7en
- Regular Member
- Posts: 1264
- Joined: August 29th, 2007, 1:47 am
- Location: Canada(brrrr, it's cold)
- Contact:
Re: The New Toy/Toys Are Finished
ya, I know lol, kinda funny how they do things eh?
Just like GM does......my darn cobalt has gone back for recall work like 6 times. It's an '06 too....
7
Just like GM does......my darn cobalt has gone back for recall work like 6 times. It's an '06 too....
7
1992 mx-3 GS-T, 10-12psi, T3/t4 hybrid, Turbosmart WG, AFPR, SSAC TURBO pipes, MSD Blaster coil, K&N, AEM W/B, MSnS(full standalone), 225Whp street tuned(10psi), 245Whp (12psi)(300bhp!!!)
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
Re: The New Toy/Toys Are Finished
If you are looking into oil cooling the computer -
http://www.pugetsystems.com/submerged.php" onclick="window.open(this.href);return false;
http://www.pugetsystems.com/submerged.php" onclick="window.open(this.href);return false;