Turbulence Dutch mx3
-
- Regular Member
- Posts: 156
- Joined: May 19th, 2005, 4:11 pm
- Location: The netherlands ( europe)
Turbulence Dutch mx3
first off, got the mx3 for 2 years now...
got a lot of problems with the ignition/ecu last winter 2006/2007.
now she's all done (for now)
but this season things are already gonna change, ordered a new frontbumper (mazdaspeed)
this is how she started:
then this happened
then i finally got my KLZE engine
i made a complete new rooffinish with black skai leather
then it was time to get the outside ready..
started with the k-max skirts
PS: the hood wasnt that way, it got damaged during the swap, so i was riding with a silver one for a couple of months just because that was the only one i could get my hands on
rear diffusor placed. made it custom. normally it had an opening on the left so the exhaustpipe would fit in nice. because i had a L/R exhaust system i filled it up with polyesther and sanded it down so it just looks nice and clean
then i put on the frontbumper, postert model..
and finally replaced the silver hood with a carbon version
mods done so far:
ENGINE/performance:
* 2.5L v6 curved neck KLZE
* Ceramic clutch
* stainless steel exhaust line ending with 2 freeflows
* Stainless steel SSautochrome headers
* Stainless steel catalitic converter
* Aluminium Cold air intake
* Splitfire 8mm dualcore wires
* NGK bougies BKR7E
* engine damper
* Shortshifter
* SRD bushings and bronze oil bushings
* Sandtler RS remschijven with ferrodo DS2500 brakepads
EXTERIOR:
* Postert frontbumper
* customizde achterdiffusor
* K-max sideskirts
* VRS carbon motorkap
* Dezent T 17inch rims
* smoked slimvisors
* Mazda 6 white side signals
* Black Altezzas
* clear white mistlampen in voorbumper
* Custom made Black front headlights
* Bi-xenon 8000K
* Flexwipers
got a lot of problems with the ignition/ecu last winter 2006/2007.
now she's all done (for now)
but this season things are already gonna change, ordered a new frontbumper (mazdaspeed)
this is how she started:
then this happened
then i finally got my KLZE engine
i made a complete new rooffinish with black skai leather
then it was time to get the outside ready..
started with the k-max skirts
PS: the hood wasnt that way, it got damaged during the swap, so i was riding with a silver one for a couple of months just because that was the only one i could get my hands on
rear diffusor placed. made it custom. normally it had an opening on the left so the exhaustpipe would fit in nice. because i had a L/R exhaust system i filled it up with polyesther and sanded it down so it just looks nice and clean
then i put on the frontbumper, postert model..
and finally replaced the silver hood with a carbon version
mods done so far:
ENGINE/performance:
* 2.5L v6 curved neck KLZE
* Ceramic clutch
* stainless steel exhaust line ending with 2 freeflows
* Stainless steel SSautochrome headers
* Stainless steel catalitic converter
* Aluminium Cold air intake
* Splitfire 8mm dualcore wires
* NGK bougies BKR7E
* engine damper
* Shortshifter
* SRD bushings and bronze oil bushings
* Sandtler RS remschijven with ferrodo DS2500 brakepads
EXTERIOR:
* Postert frontbumper
* customizde achterdiffusor
* K-max sideskirts
* VRS carbon motorkap
* Dezent T 17inch rims
* smoked slimvisors
* Mazda 6 white side signals
* Black Altezzas
* clear white mistlampen in voorbumper
* Custom made Black front headlights
* Bi-xenon 8000K
* Flexwipers
2.5L KLZE engine, CF hood, Postert frontbumper, kmax skirts, custom diffusor..
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102
- TREVO123
- Regular Member
- Posts: 654
- Joined: November 29th, 2005, 8:57 pm
- Location: BC, CANADA
- Contact:
Re: Turbulence Dutch mx3
very nice dude, keep up the good work
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
- Kirk95gs
- Supporting Member
- Posts: 820
- Joined: July 21st, 2006, 10:02 am
- Location: Nova Scotia/New Bunswick
- Contact:
Re: Turbulence Dutch mx3
Great job!... love the hood! looks great with the car... nice rims.... kinda wish I would have went with the erebuni front clip... looks great in black....
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
Re: Turbulence Dutch mx3
where did u get the CF hood from.
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
-
- Regular Member
- Posts: 156
- Joined: May 19th, 2005, 4:11 pm
- Location: The netherlands ( europe)
Re: Turbulence Dutch mx3
it's from aeroworks i believe..Limegreen mx-3 wrote:where did u get the CF hood from.
if i am not mistaken, these are also for sale in the US
2.5L KLZE engine, CF hood, Postert frontbumper, kmax skirts, custom diffusor..
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102
- Mx3Baker
- Regular Member
- Posts: 200
- Joined: July 12th, 2006, 7:10 pm
- Location: Topeka, Kansas
- Contact:
Re: Turbulence Dutch mx3
what about the rear lip what and where is it from?
93 Mx-3 GS
5 SPD Conversion
Worklog at
viewtopic.php?f=46&t=54796" onclick="window.open(this.href);return false;
5 SPD Conversion
Worklog at
viewtopic.php?f=46&t=54796" onclick="window.open(this.href);return false;
-
- Regular Member
- Posts: 156
- Joined: May 19th, 2005, 4:11 pm
- Location: The netherlands ( europe)
Re: Turbulence Dutch mx3
rear is from a german mx3 community groupbuy.
here they cost about 100-150 euro's, problem is for you USA guys is that shipping makes it a lot expensiver...
for example:
http://cgi.ebay.nl/TUV-Heckschuerze-Hec ... dZViewItem" onclick="window.open(this.href);return false;
http://search.ebay.nl/search/search.dll ... =17&fsoo=1" onclick="window.open(this.href);return false;
that's the one..
here they cost about 100-150 euro's, problem is for you USA guys is that shipping makes it a lot expensiver...
for example:
http://cgi.ebay.nl/TUV-Heckschuerze-Hec ... dZViewItem" onclick="window.open(this.href);return false;
http://search.ebay.nl/search/search.dll ... =17&fsoo=1" onclick="window.open(this.href);return false;
that's the one..
2.5L KLZE engine, CF hood, Postert frontbumper, kmax skirts, custom diffusor..
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102
- Mx3Baker
- Regular Member
- Posts: 200
- Joined: July 12th, 2006, 7:10 pm
- Location: Topeka, Kansas
- Contact:
Re: Turbulence Dutch mx3
I see... Well that is the rear that i want but i have no clue where to get it because i dont think i can do the ebay from europe....
93 Mx-3 GS
5 SPD Conversion
Worklog at
viewtopic.php?f=46&t=54796" onclick="window.open(this.href);return false;
5 SPD Conversion
Worklog at
viewtopic.php?f=46&t=54796" onclick="window.open(this.href);return false;
-
- Regular Member
- Posts: 156
- Joined: May 19th, 2005, 4:11 pm
- Location: The netherlands ( europe)
Re: Turbulence Dutch mx3
you could always ask
lot of them have ''worldwide shipping'' written with their items, just need to know how much it will be...
lot of them have ''worldwide shipping'' written with their items, just need to know how much it will be...
2.5L KLZE engine, CF hood, Postert frontbumper, kmax skirts, custom diffusor..
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102
- se7en
- Regular Member
- Posts: 1264
- Joined: August 29th, 2007, 1:47 am
- Location: Canada(brrrr, it's cold)
- Contact:
Re: Turbulence Dutch mx3
okay, maybe I am reading it wrong... but what front bumper is that? I really like it.....
maybe a link so I can buy it?
7
maybe a link so I can buy it?
7
1992 mx-3 GS-T, 10-12psi, T3/t4 hybrid, Turbosmart WG, AFPR, SSAC TURBO pipes, MSD Blaster coil, K&N, AEM W/B, MSnS(full standalone), 225Whp street tuned(10psi), 245Whp (12psi)(300bhp!!!)
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
Re: Turbulence Dutch mx3
Ive got one that i got sent to my by mistake and i never sent it back, ill sell it to ya for real cheap.se7en wrote:okay, maybe I am reading it wrong... but what front bumper is that? I really like it.....
maybe a link so I can buy it?
7
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: Turbulence Dutch mx3
If you still have it, I want it!!Johnjj728 wrote:
Ive got one that i got sent to my by mistake and i never sent it back, ill sell it to ya for real cheap.
Also, Turbulence, can I se a pic of your engine damper?
I L VE your car!
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: Turbulence Dutch mx3
EDIT: Thought I was sending a PM
Last edited by fowljesse on September 23rd, 2008, 4:17 pm, edited 1 time in total.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: Turbulence Dutch mx3
turburlence, your car is sick dude! I love the headliner, painted headlights, dual exhaust and the hood - I have GOT to get one of those hoods in CF!!!
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
- Jovian2k
- Supporting Member
- Posts: 851
- Joined: June 3rd, 2004, 2:01 am
- Location: La Prairie, QC + Stratford, CT
Re: Turbulence Dutch mx3
Yes I agree, VERY well done. Love that bumper, and it looks great with the hood.