Potential mx-3 owner

General Mazda MX-3 Discussions
Post Reply
mazda/on/my/brain
Junior Member
Posts: 2
Joined: October 7th, 2007, 3:01 am

Potential mx-3 owner

Post by mazda/on/my/brain »

I've been surfing the net looking for info on the MX-3 and came across this great site! What's up everyone!?

Names Mr B. and I am currently looking at a 1996 MX-3 GS Precidia. I'm hoping to become it proud new papa and would appreciate anyones input on anything regarding it.

The current owner tells me that it has not been modified in any way and its in perfect working condition.

I have a picture of the engine bay

Image

and I have seen this:

http://www.mx-3.com/phpbb2/viewtopic.php?t=46677


Would I be correct to think that the car I am looking at has the IMF in the second picture as opposed to the top right one in the first picture?

And if this is so... is it right? Did that model come with that IMF?

I am a car enthusiast and noob, not expert so I would appreciate any help not ridicule! Thanks guys!
User avatar
Dali
Supporting Member
Posts: 1621
Joined: January 28th, 2003, 2:01 am
antispam: No
Location: Williams lake, BC

Post by Dali »

welcome to the site, these are fun cars to drive around. also fun to mod if you have the time and money (ive probably hit the 20,000 mark with car), whatever you need help with this site has some pretty smart people, do a search first so you dont have people jumping on you for asking a question that has been asked a hunfred times before.
mazda/on/my/brain
Junior Member
Posts: 2
Joined: October 7th, 2007, 3:01 am

Post by mazda/on/my/brain »

Hi! Thanks for the reply. I was trying to avoid that but I wasn' t really sure where to find an answer other then asking someone to look at the picture and tell me what they think.
Raven95150
Regular Member
Posts: 69
Joined: September 16th, 2007, 10:49 pm
Location: Twin Cities, MN

Post by Raven95150 »

The stock engine in the GS is the K8, which is the manifold in the top right of that first picture. If nothing has been modified in the car you are looking at, then it has that manifold. It just looks a little different in that picture because it has been removed from the car.
No more MX-3
2005 Hyundai Tiburon GT
95 F-150...6" lift, 35" tires
Mnemonic
Forum Moderator
Posts: 3415
Joined: September 3rd, 2002, 2:01 am
Location: Eastern Hemisphere
Contact:

Post by Mnemonic »

looks to be in decent condition (then again its just a pic) needs a good rub down with some degreaser for all that dust. k8s (the v6gs) are fun little car, they don't get that bad of gas mileage and they have a lil go in them I STRONGLY RECOMMEND that you do not buy an automatic they are nothing but trouble, and you'll have to end up swapping a manual in or keep replacing them.
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs

01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

Post by Juans_93_MX3 »

I agree, DO NOT get a automatic. Unless you plan to swap it out for a Manual tranny. Automatic trannies on these cars will die quickly on you.

I have only heard of 1 auto that ran well at 200hp. It was on a Probe with a modified valve body and tranny cooler
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
PGT97_Racer
BANNED Member
Posts: 34
Joined: October 5th, 2007, 10:20 am

Post by PGT97_Racer »

Welcome to the club!
Post Reply

Return to “General Mazda MX-3”