Who would win..
- TREVO123
- Regular Member
- Posts: 654
- Joined: November 29th, 2005, 8:57 pm
- Location: BC, CANADA
- Contact:
Who would win..
Sorry if this is a repost, but i couldnt find the info i was lookin for...
Who would win..
92 Mx3 Gs(k8) 5spd with intake and exhuast, 15 " rims
VS a
93 Mx3 with Bp, Intake, Rx7 vaf,Exhaust and 17" rims
What ya think? Me n my buddy havent made it to the track to race yet..so let me know..
Who would win..
92 Mx3 Gs(k8) 5spd with intake and exhuast, 15 " rims
VS a
93 Mx3 with Bp, Intake, Rx7 vaf,Exhaust and 17" rims
What ya think? Me n my buddy havent made it to the track to race yet..so let me know..
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
-
- Supporting Member
- Posts: 1460
- Joined: September 28th, 2001, 2:01 am
- Location: Killa Queenz NYC
- Contact:
Thats about as much of a drivers race as you can get. His car is 200lbs lighter about but the 17" rims kind of negate that. That RX7 VAF will probably give him an upper RPM advantage though but whoever drives better will win guaranteed.
1993 Mazda RX-7 Touring Edition Innocent Blue Mica- Not stock...
1993 Teal MX-3 GS- KLZE and other goodies. RIP
1993 Teal MX-3 GS- KLZE and other goodies. RIP
- TREVO123
- Regular Member
- Posts: 654
- Joined: November 29th, 2005, 8:57 pm
- Location: BC, CANADA
- Contact:
Hey now!... How is trevs v6 fresher? Is it cuz ur a V6 guy and not a 4banger?
My bp mx is running pretty good now monte..
My bp mx is running pretty good now monte..
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
- TREVO123
- Regular Member
- Posts: 654
- Joined: November 29th, 2005, 8:57 pm
- Location: BC, CANADA
- Contact:
Also gettin rid of the 17s and replacing them with the 15" EGT rims..
Sub box will also been gettin removed..
Sub box will also been gettin removed..
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
- XxantwawnxX
- Regular Member
- Posts: 1281
- Joined: January 8th, 2005, 11:08 pm
- Location: Newportnews VA
v6 FTW
* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
SHYT BP FTW.
its all about the BP nah j/k
i get rid of the 17in rims.
on my BP MX-3 im using the miata 94 14in rims... there are lite very lite
15.6@90 in oem bp form
its all about the BP nah j/k
i get rid of the 17in rims.
on my BP MX-3 im using the miata 94 14in rims... there are lite very lite
15.6@90 in oem bp form
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
- mx3autozam
- Senior Member
- Posts: 2950
- Joined: September 24th, 2005, 9:09 pm
- Location: Kitchener
- TREVO123
- Regular Member
- Posts: 654
- Joined: November 29th, 2005, 8:57 pm
- Location: BC, CANADA
- Contact:
Well i decided i am going to be downsizing in the audio department, as for my subs n box weigh around 300LBs, and the 17s are going for sure and getting replaced with the 95 Style egt rims. and a Header is going to be put on...jus gotta finished the downpipe for it.
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
-
- Supporting Member
- Posts: 1460
- Joined: September 28th, 2001, 2:01 am
- Location: Killa Queenz NYC
- Contact:
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
I have a custom box that houses 4 - 12" subs... plus 2 amps on the back... now that's alot of weight....
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
- TREVO123
- Regular Member
- Posts: 654
- Joined: November 29th, 2005, 8:57 pm
- Location: BC, CANADA
- Contact:
I have a diff box now monte, it weighs at least a 100lbs from sight and sound..then the clarion subs,amp.. and that.. it took 2 ppl to get it in!
Now the previous subwall in my car when i got it, that weighed probly around 600Lbs,
Now the previous subwall in my car when i got it, that weighed probly around 600Lbs,
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811