Idle..

V6 Technical/Performance Discussions
Post Reply
Sal
Regular Member
Posts: 172
Joined: February 9th, 2007, 12:30 pm
Location: Toronto, Ont.

Idle..

Post by Sal »

hey guys...i just got my ZE curve neck 2 weeks ago very nice and a very clean engine. just concerned about the idle, it idles at like 800-1000 rpm and when i press the clutch it revs to like 1200-1300 rpm for like 2 seconds or soo then it'll go down to 1000-1100 rpm....unno wat it could be didnt have this problem with the K8... any suggestions/comments is greatly apprecitated.

thx!!
93 ZE curve neck, kl36 ecu, apex lowring springs tokico struts front and rear upper strut bars and a CAI.. still building!!
User avatar
mx3autozam
Senior Member
Posts: 2950
Joined: September 24th, 2005, 9:09 pm
Location: Kitchener

Post by mx3autozam »

TPS and idle need to be set!
93 Mazda MX3 KLZE Turbo
Sal
Regular Member
Posts: 172
Joined: February 9th, 2007, 12:30 pm
Location: Toronto, Ont.

Post by Sal »

cool, thanx john!!

who can help me with with that around here...?
93 ZE curve neck, kl36 ecu, apex lowring springs tokico struts front and rear upper strut bars and a CAI.. still building!!
Post Reply

Return to “V6 Technical/Performance”