us made made manifold for jap car?

IRISHmx-3 · Post by **IRISHmx-3** » July 14th, 2007, 4:21 pm

just wondering will there be a problem if i buy a manifold from corksport to fit to my RHD mx3

PATDIESEL · Post by **PATDIESEL** » July 14th, 2007, 5:28 pm

Problem may be that you have the 1.5L not the 1.6L or 1.8L. But I don't know much about the 4 bangers.

IRISHmx-3 · Post by **IRISHmx-3** » July 14th, 2007, 5:59 pm

the 1.5 is the same as 1.5 just faster

erm no like we had a golf once and got a manifold in the US but the steering rack was in the way! i just wondering would it be differend

Yoda · Post by **Yoda** » July 20th, 2007, 12:26 am

The B5 and the B6 are identical engines except for the crank. The steering rack is above the tunnel for the exhaust, shift linkage and rear drive shaft. BTW the Kiwi's have been making a tubular 4-1 exhaust manifold for the B5-ZE in the BG/EC chassis for many years now. I believe that there is a UK agent for this company. Unfortunately the agent in Canada will not import to older Mazda applications.