Front Endlinks.... Possibilities???

atlantamx3 · Post by **atlantamx3** » June 20th, 2007, 11:23 pm

I am searching for front swaybar endlinks.

Does anyone know if there are any aftermarket endlinks available?

I was thinking about a heimjoint endlink set-up.

Anyone done anything similar?

atlantamx3 · Post by **atlantamx3** » June 20th, 2007, 11:27 pm

Something like this... only home-brewed.

http://www.flyinmiata.com/index.php?dep ... r=13-99300

luisitol · Post by **luisitol** » June 28th, 2007, 3:59 pm

Won't the Probe Endlinks interchange? If so you have several options available.

monty73741 · Post by **monty73741** » June 29th, 2007, 12:46 pm

luisitol wrote:Won't the Probe Endlinks interchange? If so you have several options available.

no its a different suspension

Yoda · Post by **Yoda** » July 11th, 2007, 1:24 pm

Perry I may have some old R&D study drawing you will be intrested in from when we were looking and manufacturing rod-end end-link back in 1998/1999 but decided that there was enough of a market to go ahead with it. Send me a message on facebook to remind me and I'll try to remember to convert the CAD drawing to a fomat that you and easily display and email them to you. If this is where you are looking I'll have to locate the bill of material to make them.

projectmx · Post by **projectmx** » July 12th, 2007, 3:16 pm

can't you just buy the pieces for pretty cheap and put it together? there is a shop down wher ei'm building my mx-3 i went through their catalog and i think i found the parts i need to make them

PATDIESEL · Post by **PATDIESEL** » July 13th, 2007, 10:25 am

You most certainly can do that, but getting the right sizes, quality, bushings/spacers and all that might be a trick. The best duty models are pretty pricey so that buying the wrong ones is going to stink. We, Perry and I, were hoping thatperhaps someone could lead us along the right path. Hopefully Vaughn can find that bill of material so that we have something to start with.

projectmx · Post by **projectmx** » July 13th, 2007, 10:44 am

i guess i can hold off on mine a little longer to see what you guys come up with

Bochek · Post by **Bochek** » July 13th, 2007, 10:47 am

just do what i did with the rears

http://www.mx-3.com/phpbb2/viewtopic.ph ... m&&start=0

projectmx · Post by **projectmx** » July 14th, 2007, 12:53 pm

well you've had yours on a year how are they?

tehbrookzorz · Post by **tehbrookzorz** » July 14th, 2007, 8:25 pm

Keep us posted on what brand/part numbers you decide are the most economic/highest quality so that those that are interested may build their own.

Bochek · Post by **Bochek** » July 14th, 2007, 9:55 pm

projectmx wrote:well you've had yours on a year how are they?

actually

they never made it on the car..... waiting to do the gs subframe swap... longterm project.