Hi guys! Does anybody have a KLZE vaccum lines squematics, I will apreciate it if it can be posted on a new topic.
Thanks in advance.
vaccum lines
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: vaccum lines
I feel like I posted that a zillion times before but here it is again.Ramdao wrote:Hi guys! Does anybody have a KLZE vaccum lines squematics, I will apreciate it if it can be posted on a new topic.
Thanks in advance.
It's NOT a klze intake manifold but you can use it to do yours. Things are just place somewhere else but the route is the same. Some things are not there like the egr stuff.
It's a good diagram to start with. I used that one on my ze intake and worked fine
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- Ramdao
- Regular Member
- Posts: 92
- Joined: July 6th, 2001, 2:01 am
- Location: Caracas,Miranda,Venezuela
- Contact:
vaccum lines
Thanks a thousand times BabyblueMX3
I do apreciate your info, I know this issue you had it posted some time ago and many times too, but i have been searching for it, with no luck.
Thanks once more.
PD. Once I have the engine installed I´ll post a picture. [/img]
I do apreciate your info, I know this issue you had it posted some time ago and many times too, but i have been searching for it, with no luck.
Thanks once more.
PD. Once I have the engine installed I´ll post a picture. [/img]