What is this solenoid for?
-
- Regular Member
- Posts: 211
- Joined: May 7th, 2006, 10:01 pm
- Location: Halifax. Nova Scotia
- Contact:
What is this solenoid for?
On the firewall of my 96 mx3 gs mtx there is a mitsu solenoid with a single vacume line on it. When i got the car this was capped off. Does anyone know what it is for?
I recently did a klze swap into my OBDII car and its proving to be hell to sort out the wiring and vacume systems.
I recently did a klze swap into my OBDII car and its proving to be hell to sort out the wiring and vacume systems.
2002 Mazda Protege5 (Turbo kit 75% complete)
1996 Mazda MX-3 Gs KL-ZE
1994 Mazda MX-3 Rs (BP-T?)
1996 Mazda MX-3 Gs KL-ZE
1994 Mazda MX-3 Rs (BP-T?)
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
On the firewall, just about right in the middle. That is for the EGR charcoal canister, which I would hope you didn't hook up. I know you Canooks have to E-Test, but they look for EGR here too. Just that most of the techs look for the charcoal canister, which I left in the car to fool them.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
-
- Regular Member
- Posts: 211
- Joined: May 7th, 2006, 10:01 pm
- Location: Halifax. Nova Scotia
- Contact:
That cant be it. How would it work with only 1 vacume port on it?PATDIESEL wrote:On the firewall, just about right in the middle. That is for the EGR charcoal canister, which I would hope you didn't hook up. I know you Canooks have to E-Test, but they look for EGR here too. Just that most of the techs look for the charcoal canister, which I left in the car to fool them.
This has to be a sensor of some sort. not sure what sensor though.
Speaking of egr, how do you guy hook up the egr on your ze? the egr has 3 lines on it. 1 small vacume line and 2 larger vacume lines that go no where right now.
2002 Mazda Protege5 (Turbo kit 75% complete)
1996 Mazda MX-3 Gs KL-ZE
1994 Mazda MX-3 Rs (BP-T?)
1996 Mazda MX-3 Gs KL-ZE
1994 Mazda MX-3 Rs (BP-T?)
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Yah i believe the EGR vent solenoid or someting..but you say ONE? nipple and not two? odd..
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- Tunes67
- Supporting Member
- Posts: 4708
- Joined: January 27th, 2005, 6:36 pm
- Location: Everett, WA
- Contact:
Take a pic and post it.. only way to clear this up for certain.
Tunes67
Tunes67
"So long.. and thanks for all the fish!" "Momma says VW Bugs are the devil" "This one time at band camp.. I stuck a flute in my Throttle Body"
"Screw you guys.. I am goin home"
I am the Cranky God of Mods!!! Tremble before my fury!! LOL
"Screw you guys.. I am goin home"
I am the Cranky God of Mods!!! Tremble before my fury!! LOL
-
- Regular Member
- Posts: 211
- Joined: May 7th, 2006, 10:01 pm
- Location: Halifax. Nova Scotia
- Contact:
You are right, i will try an do that tomorow night.Tunes67 wrote:Take a pic and post it.. only way to clear this up for certain.
Tunes67
Does anyone here have an OBDII mx3 that wants to go look at there firewall for me
2002 Mazda Protege5 (Turbo kit 75% complete)
1996 Mazda MX-3 Gs KL-ZE
1994 Mazda MX-3 Rs (BP-T?)
1996 Mazda MX-3 Gs KL-ZE
1994 Mazda MX-3 Rs (BP-T?)
-
- Regular Member
- Posts: 211
- Joined: May 7th, 2006, 10:01 pm
- Location: Halifax. Nova Scotia
- Contact:
well i couldnt get a pic of it but i did read it
it said ka47 or ka87 or someting on it i believe. deffently only one vacume port on it. Says mitsubishi on it as well.
does anyone here have a 96 gs they can check for me?
I read the shop manual for a 95 and its no in there.
it said ka47 or ka87 or someting on it i believe. deffently only one vacume port on it. Says mitsubishi on it as well.
does anyone here have a 96 gs they can check for me?
I read the shop manual for a 95 and its no in there.
2002 Mazda Protege5 (Turbo kit 75% complete)
1996 Mazda MX-3 Gs KL-ZE
1994 Mazda MX-3 Rs (BP-T?)
1996 Mazda MX-3 Gs KL-ZE
1994 Mazda MX-3 Rs (BP-T?)
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
LOL you have 2 identical threads going for the same issue... like tunes said, take a picture!
if you can't get a pic right back there, take one a little further out and circle what you are talking about or something...
if you can't get a pic right back there, take one a little further out and circle what you are talking about or something...
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs