Do they make a rear lip for our car ?
-
- BANNED Member
- Posts: 35
- Joined: March 18th, 2007, 10:48 am
- Location: Muskegon,MI
- Contact:
Do they make a rear lip for our car ?
I want a rear lip, do they make one or is there one that can fit with some fabrication?
1993 Mazda MX-3 GS
- TREVO123
- Regular Member
- Posts: 654
- Joined: November 29th, 2005, 8:57 pm
- Location: BC, CANADA
- Contact:
yes they do make one, A few guys have them on here.
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
-
- BANNED Member
- Posts: 35
- Joined: March 18th, 2007, 10:48 am
- Location: Muskegon,MI
- Contact:
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Funny you should say that, at the top of this page I see a Pakfeifer banner that shows a mx or 2 with rear lips, may wanna check out thier site:
http://www.pakfeifertuning.com/store/
http://www.pakfeifertuning.com/store/
-
- BANNED Member
- Posts: 35
- Joined: March 18th, 2007, 10:48 am
- Location: Muskegon,MI
- Contact:
- TREVO123
- Regular Member
- Posts: 654
- Joined: November 29th, 2005, 8:57 pm
- Location: BC, CANADA
- Contact:
Well i seem to have found it fine, its rear apron
http://pakfeifertuning.com/store/produc ... cts_id/244
http://pakfeifertuning.com/store/produc ... cts_id/244
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
-
- Regular Member
- Posts: 190
- Joined: December 12th, 2006, 10:03 pm
- Location: hillbilly hell, IN
- Contact:
i dont like that one...(just my opinion.) i customized one of my own....its a honda accord rear lip that i cut a spot out for my exhaust(it made it shorter to fit the car as well) and screwed it to the bumper..its not huge but it is about 2 inches in width...
live life a quarter mile at a time.
life is about learning from your mistakes and not regreting them.
life is about learning from your mistakes and not regreting them.
-
- BANNED Member
- Posts: 35
- Joined: March 18th, 2007, 10:48 am
- Location: Muskegon,MI
- Contact:
I dont like that lip either, I am interested to see pictures of your lip. What yr accord did you use and what lip? I am look for something that will flow with the front GS lip. I like the clean look! Please get back to me asap.93-mx-3 wrote:i dont like that one...(just my opinion.) i customized one of my own....its a honda accord rear lip that i cut a spot out for my exhaust(it made it shorter to fit the car as well) and screwed it to the bumper..its not huge but it is about 2 inches in width...
1993 Mazda MX-3 GS
-
- Regular Member
- Posts: 190
- Joined: December 12th, 2006, 10:03 pm
- Location: hillbilly hell, IN
- Contact:
http://viewmorepics.myspace.com/index.c ... &albumId=0
ill have to ask my friend wat year it is..o n check this out...i no its kinda wierd but ummm....ya it was the front lip that i used...lol. but let me no wat u think. its pages 2 and 3
ill have to ask my friend wat year it is..o n check this out...i no its kinda wierd but ummm....ya it was the front lip that i used...lol. but let me no wat u think. its pages 2 and 3
live life a quarter mile at a time.
life is about learning from your mistakes and not regreting them.
life is about learning from your mistakes and not regreting them.
- PWRD_BY_HKS
- Regular Member
- Posts: 696
- Joined: August 11th, 2004, 2:01 am
- Location: El Paso
wow ....it looks alot better than i had envisioned... what kinda side skirts are those...
jdmx-3 KID OF THE
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.
- ryan_Fuerte
- Regular Member
- Posts: 223
- Joined: May 12th, 2006, 1:01 pm
- Location: Ottawa
- Contact:
very good lookin car!! nice touch with the lip
Mx-3 GSr : Rebuilt klde with 5spd swap, xtd stage 3 clutch, Magnaflow dual exhaust,Accord custom intake, kyb gr2 struts with eibach springs, civic dual halo projectors, black altezzas, white 15'' oz rims, rolling on dunlop street slicks.
http://www.cardomain.com/ride/2400330
http://www.cardomain.com/ride/2400330
-
- BANNED Member
- Posts: 35
- Joined: March 18th, 2007, 10:48 am
- Location: Muskegon,MI
- Contact: