How my car looks currently...

A forum for posting automotive related Images & Video Clips. (Please keep it clean, no profanity or offensive material.)
Post Reply
User avatar
XxantwawnxX
Regular Member
Posts: 1281
Joined: January 8th, 2005, 11:08 pm
Location: Newportnews VA

How my car looks currently...

Post by XxantwawnxX »

Nothing special...i made that hoodscoopmyself...and the fiiberglass hood fits bad..it looks REALLY BAD up close.... haha i gotta redo it later
im gonna primer the whole car black before i paint it. My new clutch came in and my findanza flywheel and my black tails are coming...and i got a new momo steering wheel wooo track season is coming!

EDIT: oh and the hood scoop is right over my intake from the turbo : ) only made it to be functional.
Image
Image

* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
Top
e2blade
Regular Member
Posts: 229
Joined: August 28th, 2006, 11:13 am
Location: Payette, ID
Contact:
Contact e2blade

Post by e2blade »

Deadly sleeper :)
Top
Mnemonic
Forum Moderator
Posts: 3415
Joined: September 3rd, 2002, 2:01 am
Location: Eastern Hemisphere
Contact:
Contact Mnemonic

Post by Mnemonic »

e2blade wrote:Deadly sleeper :)

Deffinetly not a sleeper, but deadly yes...



Antwanwn you know i dont appreciate you driving my car around pretending its yours now bring it to me now! :)
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs

01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Top
User avatar
Franko
Supporting Member
Posts: 1443
Joined: September 2nd, 2002, 2:01 am
Location: Newfoundland, Canada
Contact:
Contact Franko

Post by Franko »

What happened to your other wheels? I liked those.
93 MX3, BP, Haltech E6X, Bully Six Puck Clutch, Pauter Rods, Wiseco Pistons, Port and Polish, Turbonetics T3/T4 Ball Bearing turbo and a partridge in a pear tree.
Image
Top
User avatar
XxantwawnxX
Regular Member
Posts: 1281
Joined: January 8th, 2005, 11:08 pm
Location: Newportnews VA

Post by XxantwawnxX »

I got them cause they are the lightest 17 inch rims i can find..at 14 pounds each. Plus they look good...pic does not really do much for em. And last of all my car is gonna be all black that was alwasy my plan.
Image

* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
Top
User avatar
PWRD_BY_HKS
Regular Member
Posts: 696
Joined: August 11th, 2004, 2:01 am
Location: El Paso

Post by PWRD_BY_HKS »

well home slice.... like i said before..... CLEAN!!!!!!!!!!!
jdmx-3 KID OF THE Image
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.
Top
User avatar
Limegreen mx-3
Regular Member
Posts: 1778
Joined: October 29th, 2002, 2:01 am
Location: San Antonio TX
Contact:
Contact Limegreen mx-3

Post by Limegreen mx-3 »

welcome to the sleeper club its a blast to see the other car owner frown like WTF no Fking way.
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
Top
User avatar
XxantwawnxX
Regular Member
Posts: 1281
Joined: January 8th, 2005, 11:08 pm
Location: Newportnews VA

Post by XxantwawnxX »

PWRD_BY_HKS wrote:well home slice.... like i said before..... CLEAN!!!!!!!!!!!
HEHE thats why i love the net...its not very clean in person. The plexi glass hatch fits horrid on the back.... same with the hood. the bumper is falling down on the driver side hahah ....cant wait to get it really clean.

but yes..being a sleeper is so fun. But somtimes they notice my exhaust is going out the front...and somtimes that makes people not want to race.

Hey limegreen, im hoping to give your 1/4 time a run for its money wheni get to the track..wish me luck..ill need it.
Image

* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
Top
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:
Contact hgallegos915

Post by hgallegos915 »

How much did u get the hatch plexiglassed for?
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Top
User avatar
XxantwawnxX
Regular Member
Posts: 1281
Joined: January 8th, 2005, 11:08 pm
Location: Newportnews VA

Post by XxantwawnxX »

Some guy has a racing MX3 shell on ebay..i snagged it. got the hatch and hood for 200. i think i weighed the factory hatch at just under 85 pounds or so...the one i got weighs 25 pounds...and my hood is soo light i dont even think it weighs 10 pounds.
Image

* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
Top
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:
Contact hgallegos915

Post by hgallegos915 »

omg do you have any idea how much I envy you? lol thats some nice weight reduction there.
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Top
Teqnyck
Regular Member
Posts: 147
Joined: December 10th, 2005, 7:49 pm
Location: Salem, oregon
Contact:
Contact Teqnyck

Post by Teqnyck »

XxantwawnxX wrote:Some guy has a racing MX3 shell on ebay..i snagged it. got the hatch and hood for 200. i think i weighed the factory hatch at just under 85 pounds or so...the one i got weighs 25 pounds...and my hood is soo light i dont even think it weighs 10 pounds.

:x Doh, I want those parts sooo bad!! ARG!! BTW, what is that on your bumper, exhaust cut out? Wastegate dump?
KLZE/KL31 ecu/Pacesetter headers/track pipe cat delete/2.5 inch custom exhaust out to fart pipe/warm air intake for now :(/Fidanza 9lbs flywheel/Stage 2 kevlar road racing clutch which still slips/stock wheels/BFG KDW-2 tires. Looks bone stock ;)

There are those who claim to be street racers, and then there are those who claim the streets for themselves. I am not a street racer. I am a StreetSweeper.
http://www.streetsweepersracing.com
Top
User avatar
XxantwawnxX
Regular Member
Posts: 1281
Joined: January 8th, 2005, 11:08 pm
Location: Newportnews VA

Post by XxantwawnxX »

My muffller.
Image

* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
Top
Teqnyck
Regular Member
Posts: 147
Joined: December 10th, 2005, 7:49 pm
Location: Salem, oregon
Contact:
Contact Teqnyck

Post by Teqnyck »

Damn, man. That must be loud as hell!
KLZE/KL31 ecu/Pacesetter headers/track pipe cat delete/2.5 inch custom exhaust out to fart pipe/warm air intake for now :(/Fidanza 9lbs flywheel/Stage 2 kevlar road racing clutch which still slips/stock wheels/BFG KDW-2 tires. Looks bone stock ;)

There are those who claim to be street racers, and then there are those who claim the streets for themselves. I am not a street racer. I am a StreetSweeper.
http://www.streetsweepersracing.com
Top
User avatar
XxantwawnxX
Regular Member
Posts: 1281
Joined: January 8th, 2005, 11:08 pm
Location: Newportnews VA

Post by XxantwawnxX »

XxantwawnxX wrote:Some guy has a racing MX3 shell on ebay..i snagged it. got the hatch and hood for 200. i think i weighed the factory hatch at just under 85 pounds or so...the one i got weighs 25 pounds...and my hood is soo light i dont even think it weighs 10 pounds.
8)
Image

* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
Top
Post Reply

Return to “Images/Videos Forum”