Dropzone Lowering Springs??
- import_fan7
- Supporting Member
- Posts: 167
- Joined: July 2nd, 2006, 7:55 pm
- Location: St.Thomas Ontario
Dropzone Lowering Springs??
I have searched on here and found nothing on dropzone lowering springs so i was just wondering if anyone out there knows if there any good or if there crap because i came across some on ebay and other sites and there at a pretty good price (if there any good) thanx
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Hey, I know a guy who had a set (he doesnt post on here much) and he found them pretty good actually. IIRC he had to chop the back springs abit though as they did not sit level, but supposably they are as good as any other spring, I say this because most springs come from almost the smae company and are all rolled the same way.
- Hoodzy
- Regular Member
- Posts: 1526
- Joined: February 19th, 2005, 4:15 pm
- Location: Calgary, Alberta
- Contact:
lol so other then being defective?solo_ryder wrote:Hey, I know a guy who had a set (he doesnt post on here much) and he found them pretty good actually. IIRC he had to chop the back springs abit though as they did not sit level, but supposably they are as good as any other spring, I say this because most springs come from almost the smae company and are all rolled the same way.
http://www.cardomain.com/id/hoodzy13" onclick="window.open(this.href);return false;
http://www.id-studio.ca" onclick="window.open(this.href);return false;
http://www.behance.net/CollinH" onclick="window.open(this.href);return false;
1995 Creek Mica Blue GS
http://www.id-studio.ca" onclick="window.open(this.href);return false;
http://www.behance.net/CollinH" onclick="window.open(this.href);return false;
1995 Creek Mica Blue GS
- import_fan7
- Supporting Member
- Posts: 167
- Joined: July 2nd, 2006, 7:55 pm
- Location: St.Thomas Ontario
- import_fan7
- Supporting Member
- Posts: 167
- Joined: July 2nd, 2006, 7:55 pm
- Location: St.Thomas Ontario
- lowridah313
- Regular Member
- Posts: 256
- Joined: September 22nd, 2006, 12:09 pm
- Location: Cambridge
I have drop zone springs. They ride alright, but the back end doesnt settle as low as the front.
Representin' the THRE3:TH1RT3EN
'02 Nissan Xterra SE, atx, 4x4, 32's
'92 Geo Tracker atx, 4x4
Feedback http://mx-3.com/phpBB3/viewtopic.php?f= ... 54&start=0" onclick="window.open(this.href);return false;
'02 Nissan Xterra SE, atx, 4x4, 32's
'92 Geo Tracker atx, 4x4
Feedback http://mx-3.com/phpBB3/viewtopic.php?f= ... 54&start=0" onclick="window.open(this.href);return false;