Will a 92 4cyl swap with a v6 for radiators
Will a 92 4cyl swap with a v6 for radiators
Ok i have 92 4cyl and i have a v6's radiator and i was wondering if i could use this radiator from the v6 for the 4cyl
-Simon-
- atlantamx3
- Supporting Member
- Posts: 2888
- Joined: June 2nd, 2001, 2:01 am
- Location: Kennesaw, Ga, USA
- Contact:
- TREVO123
- Regular Member
- Posts: 654
- Joined: November 29th, 2005, 8:57 pm
- Location: BC, CANADA
- Contact:
Becuz the coolant Outlets on the rad are in diff spots, they are oppistite the 4cyl rad...you would need long rad hoses, and wouldnt provide good cooling.
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
- TREVO123
- Regular Member
- Posts: 654
- Joined: November 29th, 2005, 8:57 pm
- Location: BC, CANADA
- Contact:
Then you have the v6 rad upside down, or just a RS rad.
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
rookie all i got to say a v6 rad will not match up.
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
- atlantamx3
- Supporting Member
- Posts: 2888
- Joined: June 2nd, 2001, 2:01 am
- Location: Kennesaw, Ga, USA
- Contact: