so im blowing oil...

V6 Technical/Performance Discussions
Post Reply
User avatar
Quiksilver
Junior Member
Posts: 4
Joined: September 4th, 2006, 10:54 am

so im blowing oil...

Post by Quiksilver »

can anyone help a poor young guy out? i just bought a 94 mx-3 GS and it needs some repairs to pass safety and especially Emissions. So my major issue is that it blows oil out of the muffler whenever i step on the gas. Im hoping i wont have to spend and arm and a leg fixing this as in rebuild or engine swap.
Any help would be greatly appreciated

Thanks :D
'94 MX-3
web/2456000-2456999/2456631_1.jpg
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:

Post by hgallegos915 »

You mean it blows soreta bluish white smoke? or is it black smoke? can be bad rings or bad valve seals.. to pass emissions use thicker oil during testing ... still i dont know..i wish you good luck because if its rings then most likely it wont pass. I made an old toyota pass with bad valve seals.
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
User avatar
Quiksilver
Junior Member
Posts: 4
Joined: September 4th, 2006, 10:54 am

Post by Quiksilver »

no i mean the car actually shoots out oil, whenever i rev or accerlerate it leaves a line of oil spots behind me :?:
'94 MX-3
web/2456000-2456999/2456631_1.jpg
User avatar
PATDIESEL
Senior Member
Posts: 4476
Joined: August 13th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Atlanta, GA.

Post by PATDIESEL »

That is alot of oil!! You'll need to find and fix the leak before you'll pass. I'd ask a good mechanic to find the problem and then tell you what your options are. You could do a swap for relatively cheap (compared to a rebuild). Could be piston rings, valve seals, really bad injector seals or maybe even a crack in the block somwhere. Do a compression check to help see how bad the leak is.
Image
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
User avatar
kiwi_MX3
Regular Member
Posts: 736
Joined: August 10th, 2004, 2:01 am
Location: Backpacking in Canada in vancouver 13march onwards
Contact:

Post by kiwi_MX3 »

Quiksilver wrote:no i mean the car actually shoots out oil, whenever i rev or accerlerate it leaves a line of oil spots behind me :?:
I would lke pat said, take it to a mechanic for a second opinion

I know two of my cars have a bad habit of passing a lot of water
and carbon ( damm catalictic converters ) and can spit it a fair
distance if you just sit there and rev it.

If it is oil, thats a hell of a lot of oil, and yea your be best to swap
the motor out, a lot of the guys on here have k8's just stitting aorund
that you might be able to score for shipping and a case of beer..
Kiwi - Native Bird Of New Zealand, semi-nocturnal, secretive bird
Flightless, though can be found flying firstclass
Poor eyesight, though can spot a good pub at 100yards.
Post Reply

Return to “V6 Technical/Performance”