sept 16th @ 2pm... end of summer big meet at oshawa beach
- ovendenk
- Supporting Member
- Posts: 911
- Joined: January 12th, 2004, 2:01 am
- Location: Kamloops, BC
- Contact:
sept 16th @ 2pm... end of summer big meet at oshawa beach
hey guys,
how do you feel about a big meet on like the 16th of september? getting this out there early to make sure it's planned well in advance and hopefully we can get a big crowd out for it. any thoughts on a good location for both the gta crowd as well as the eastern crowd?
i've been in kamloops, bc all summer and will be back in ottawa on the 3rd of sept for school. i would love to get together with you guys before a lot of us put our babies to sleep for the winter.
how do you feel about a big meet on like the 16th of september? getting this out there early to make sure it's planned well in advance and hopefully we can get a big crowd out for it. any thoughts on a good location for both the gta crowd as well as the eastern crowd?
i've been in kamloops, bc all summer and will be back in ottawa on the 3rd of sept for school. i would love to get together with you guys before a lot of us put our babies to sleep for the winter.
Last edited by ovendenk on September 14th, 2006, 5:28 pm, edited 1 time in total.
kevin (aka The Oven)
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Re: sept 16th... end of summer big meet
Hutch's perhaps. We haven't had a big one there yet this year.ovendenk wrote: any thoughts on a good location
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
-
- Regular Member
- Posts: 1704
- Joined: December 31st, 2005, 5:54 pm
- Location: Burlington + Grimsby, Ontario, Canada
- Contact:
you beat me too it, i was gonna throw one together when i got back from vacation. damn you. LOL jk.
if we make it a sunday, we could cruse down to lundy's lane on the cruse route we used for the MMM, but this time il be sure to drive it first to figgure out where the hell where going.
Bochek
if we make it a sunday, we could cruse down to lundy's lane on the cruse route we used for the MMM, but this time il be sure to drive it first to figgure out where the hell where going.
Bochek
Adam Bochek's 93 1.6L SOHC http://www.bochek.ca/car.gif
- ovendenk
- Supporting Member
- Posts: 911
- Joined: January 12th, 2004, 2:01 am
- Location: Kamloops, BC
- Contact:
well this is a good start i guess, but there's a lot of GTA guys out there that haven't spoken yet. bunch of people have checked it out though. where is hutches? i keep hearing about it, but don't know location.
kevin (aka The Oven)
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
-
- Regular Member
- Posts: 33
- Joined: October 13th, 2005, 1:41 pm
- ovendenk
- Supporting Member
- Posts: 911
- Joined: January 12th, 2004, 2:01 am
- Location: Kamloops, BC
- Contact:
wow, is there no where on the east side of the gta that is a good meet spot? i would like to avoid driving 7-8 hrs for this thing. i know if i'm able to drive like 3 or 4 hrs to ajax or toronto, that you gta guys should be able to drive like 1 or 2 at most for most of you. how's that sound? any nice spots near ajax or something?
kevin (aka The Oven)
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
- MX3 GSR for dummies
- Regular Member
- Posts: 466
- Joined: October 28th, 2005, 9:00 am
- Location: GHETTOVALE, Ontario
There's a great parking area by the lake in Oshawa. Just one thought. I suggest we gather some idea's from John as he is familiar with the east meets and can think of a good location.
If at first you don't succeed....it never happened
94 mx3 GS w/ KLZE, KL31 ECU, clutchmaster stage 3, cross drilled rotors, Custom ram air intake, Custom exhaust, Toyo tires, 250LPH fuel pump, Modified Distributor, Upgraded Wiring etc, external HEI, Full Body Drift kit and freshly painted Grey. Interior neon accents and much more in progress
94 mx3 GS w/ KLZE, KL31 ECU, clutchmaster stage 3, cross drilled rotors, Custom ram air intake, Custom exhaust, Toyo tires, 250LPH fuel pump, Modified Distributor, Upgraded Wiring etc, external HEI, Full Body Drift kit and freshly painted Grey. Interior neon accents and much more in progress
- ovendenk
- Supporting Member
- Posts: 911
- Joined: January 12th, 2004, 2:01 am
- Location: Kamloops, BC
- Contact:
oshawa or picton would be fine. i'm trying to get the gta guys input into where this should be held because i want to have the most number mx-3s possible.
maybe this could be in conjunction with the dyno day bochek is working on?
anyways, i'm driving home this week (see location ) so i won't be able to check this until next week probably.
kevin (aka The Oven)
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
- inthemaking
- Regular Member
- Posts: 145
- Joined: August 10th, 2006, 5:22 pm
- Location: peterborough ont