On the 1.8 model: are the cv axles different?
: are the wheel hubs different? do the splines differ?
: does the wiring loom under the dash differ from the 1.8 to the 1.6?
Thanx
please help I need to know
-
- Regular Member
- Posts: 1704
- Joined: December 31st, 2005, 5:54 pm
- Location: Burlington + Grimsby, Ontario, Canada
- Contact:
are you refering to the 1.8 v6 (k8) or the 1.8 I4 (bp)
Bochek
Bochek
Adam Bochek's 93 1.6L SOHC http://www.bochek.ca/car.gif
- MechaManZero
- Regular Member
- Posts: 690
- Joined: March 20th, 2006, 7:36 pm
Bochek... This is a four cylinder faq, it has to be swapping from the 1.6 to 1.8 buddy lmao
Çlark
![Image](http://i64.photobucket.com/albums/h192/Mechamanzero/MX-3/2mx3.jpg)
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
![Image](http://i64.photobucket.com/albums/h192/Mechamanzero/MX-3/2mx3.jpg)
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
-
- Regular Member
- Posts: 1704
- Joined: December 31st, 2005, 5:54 pm
- Location: Burlington + Grimsby, Ontario, Canada
- Contact:
i was assuming so, but just checking.MechaManZero wrote:Bochek... This is a four cylinder faq, it has to be swapping from the 1.6 to 1.8 buddy lmao
Bochek
Adam Bochek's 93 1.6L SOHC http://www.bochek.ca/car.gif