BPT engine Swap (in a '95 Mazda MX3, i am from germany)
-
- Junior Member
- Posts: 18
- Joined: June 25th, 2006, 8:37 am
BPT engine Swap (in a '95 Mazda MX3, i am from germany)
Hello,
i am new and i am from germany! So sorry for my english! I have a question what do i need for my '95 Mazda MX3 (Facelift), to put the BPT Engine in it? Is their in Amerika a shop how sells all that stuff?
Please answer!
Thank you very much!!!
i am new and i am from germany! So sorry for my english! I have a question what do i need for my '95 Mazda MX3 (Facelift), to put the BPT Engine in it? Is their in Amerika a shop how sells all that stuff?
Please answer!
Thank you very much!!!
Mazda MX-3 107 HP DOHC Engine (I am from Germany)
- MechaManZero
- Regular Member
- Posts: 690
- Joined: March 20th, 2006, 7:36 pm
The 4 cylinder faq part of the mx-3.com forums should have your answers. Since you have a 95 though, your gonna need to swap extra stuff like the wiring harness and switch to manual speed sensor. I am up to $3500 USD so I don't know how much you are going to spend over there.
Çlark
![Image](http://i64.photobucket.com/albums/h192/Mechamanzero/MX-3/2mx3.jpg)
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
![Image](http://i64.photobucket.com/albums/h192/Mechamanzero/MX-3/2mx3.jpg)
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
- atlantamx3
- Supporting Member
- Posts: 2888
- Joined: June 2nd, 2001, 2:01 am
- Location: Kennesaw, Ga, USA
- Contact:
- MechaManZero
- Regular Member
- Posts: 690
- Joined: March 20th, 2006, 7:36 pm
Damn you Perry showing off MOCA once again lol jk.
Çlark
![Image](http://i64.photobucket.com/albums/h192/Mechamanzero/MX-3/2mx3.jpg)
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
![Image](http://i64.photobucket.com/albums/h192/Mechamanzero/MX-3/2mx3.jpg)
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
-
- Junior Member
- Posts: 18
- Joined: June 25th, 2006, 8:37 am
- MechaManZero
- Regular Member
- Posts: 690
- Joined: March 20th, 2006, 7:36 pm
Nope, I was never really good at foreign langauges. Sorry man.
Çlark
![Image](http://i64.photobucket.com/albums/h192/Mechamanzero/MX-3/2mx3.jpg)
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
![Image](http://i64.photobucket.com/albums/h192/Mechamanzero/MX-3/2mx3.jpg)
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
-
- Junior Member
- Posts: 18
- Joined: June 25th, 2006, 8:37 am
- MechaManZero
- Regular Member
- Posts: 690
- Joined: March 20th, 2006, 7:36 pm
Um everyone has lists in the faqs and in MOCA's faqs also.
http://www.mx-3.com/phpbb2/viewtopic.php?t=34815
And just to repeat for Perry
http://www.atlantamx3.com/mocaforum/viewforum.php?f=6
http://www.mx-3.com/phpbb2/viewtopic.php?t=34815
And just to repeat for Perry
http://www.atlantamx3.com/mocaforum/viewforum.php?f=6
Çlark
![Image](http://i64.photobucket.com/albums/h192/Mechamanzero/MX-3/2mx3.jpg)
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
![Image](http://i64.photobucket.com/albums/h192/Mechamanzero/MX-3/2mx3.jpg)
95 Mazda MX3 4 Banger
Currently: H&R Lowering springs, BPT from a GTR, 18.5x6x3.5 same side inlet and outlet intercooler, Centerforce Dual Friction clutch
For BPT Frorums - http://www.aokforums.com/mazdaengines/
-
- Junior Member
- Posts: 11
- Joined: January 16th, 2005, 4:43 pm
google has a pretty good translation feature.... copy and paste any english link/page here and choose the translationalvin-is-real wrote:Can anybody translat me a list in german???
![Wink ;)](./images/smilies/icon_wink.gif)
http://www.google.com/language_tools?hl=en
-
- Junior Member
- Posts: 18
- Joined: June 25th, 2006, 8:37 am