auto to manual WIRING

wagZE · Post by **wagZE** » April 9th, 2006, 10:08 pm

did the ze swap, auto to manual swap.. the car wont start now. i saw two empty female wire connectors on the clutch side of the pedal assembly. where can i find the wires to ceonnect into them they werent on the automatic pedal assembly. i used the mx6 auto to manual swap instructions and they mentioned "tricking" the computer through a wire connector near the tranny. i didnt see it. thanks in advance for your help

atlantamx3 · Post by **atlantamx3** » April 9th, 2006, 11:54 pm

Find this pair of connectors:

And Wire the white connector like this:

And VOILA! It will crank right up.

Let me know if you have any more questions

wagZE · Post by **wagZE** » April 10th, 2006, 5:10 pm

alright cool, but what do i do with the black connector you just said find it. thanks!

atlantamx3 · Post by **atlantamx3** » April 11th, 2006, 2:54 am

nothing. it is attached to the white one... so its easy to spot.

wagZE · Post by **wagZE** » April 11th, 2006, 4:27 pm

VROOM VROOM!!!!!!