which would you go with?

A Forum For All Forced Induction Systems Topics Such As Turbos, Superchargers and Nitrous Oxide.
Post Reply
valenzul
Regular Member
Posts: 151
Joined: March 30th, 2002, 2:01 am
Location: Midwest

which would you go with?

Post by valenzul »

Recently helped a friend swap BPT into 1.6 SOHC.
Wondering what intercooler to use. He doesn't have much money anymore
after the parts gathered to make this happen. I used a Starion
intercooler on mine. Should I search for same or you think its ok to go
with either of these?

http://cgi.ebay.com/ebaymotors/INTERCOO ... enameZWDVW

or

http://cgi.ebay.com/ebaymotors/FMIC-GRE ... 9321QQrdZ1
User avatar
PATDIESEL
Senior Member
Posts: 4476
Joined: August 13th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Atlanta, GA.

Post by PATDIESEL »

I'd go with the 22". I bet 27" wide is too large to get a good angle for the piping on.
Image
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
Post Reply

Return to “Forced Induction”